Unsolved
This post is more than 5 years old
2 Posts
0
560
VNXe 3200 Replication interfaces
Hi,
I have 2x VNXe 3200's which are licensed for local recovery point.
my question is can you just cable the SP's together using the built int 10GE copper interfcaes like this;
VNXe 1 VNXe 2
SP A ethernet 3 <======================> SP A ethernet 3
SP B ethernet 3 <======================> SP B ethernet 3
SP A ethernet 4 <======================> SP B ethernet 4
SP B ethernet 4 <======================> SP A ethernet 4
as the documentation seems to suggest this configuration is supported.
Obviously you can use a switch to achieve this.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 9th, 2015 10:00
This requires a cross over cable am not sure if that works on 10G, what cross option cable we have for 10G..do we have something similar to 1G interfaces.