Unsolved
This post is more than 5 years old
7 Posts
0
979
VNXe NTP Synchronization
I am trying to get my VNXe3150 to sync up with my NTP server which is also the AD Server. The AD shows the correct time and it is synced with windows time server. I changed the setting in Unisphere to point at the NTP server and it takes it, reboots both SPs and I can ping the NTP server on the VNXe3150. However the time comes out in UTC time and is one hour and five minutes ahead the NTP server time. I know my NTP server is working , I have other windows machines that point to the same NTP sever as the VNXe3150 does and they all shows the correct time.
It seems that the VNXe3150 only displays the time in UTC. I want the VNXe3150 to use the same NTP source as other machines but there does not seem to be a way to get the VNXe3150 to sync up and show the correct time as UTC +3. when i am disabling NTP sync and manually enter the time, it show the right time. but after restarting again the same time which is 1 hour ahead.
It seams that the VNXe is stuck on a time. how can i fix this. i am trying to integrate the VNXe with my AD but because the time is not synced i cannot do this.
Has anyone hit this before?