This post is more than 5 years old
7 Posts
0
2808
VNXe3100 10GB IO Upgrade
What are the minimum code requirements to upgrade a VNXe3100 with 10GB IO modules. Is 16GB (8GB/SP) required?
Thank you!
This post is more than 5 years old
7 Posts
0
2808
What are the minimum code requirements to upgrade a VNXe3100 with 10GB IO modules. Is 16GB (8GB/SP) required?
Thank you!
Top
Jyothi_P_Bharat
317 Posts
0
August 11th, 2015 04:00
Hi Charlie,
Please have a look on this document:
https://support.emc.com/docu42228_VNXe3100-VNXe3150-Upgrading-the-Input-Output-Modules.pdf?language=en_US
Thanks
Jyothi
cwill200sci
7 Posts
0
August 11th, 2015 06:00
Thank you!
IaKK83AaCI12227
29 Posts
0
August 11th, 2015 06:00
You cannot upgrade the memory of any VNXe array...
So you have what you have to work with when it comes to available memory, period
...
stevefulmer
11 Posts
0
August 12th, 2015 06:00
You could always replace the array itself. But Alexander is correct memory on the array itself cannot be upgraded. With this being said all you need is the 8GB Per SP to upgrade the IO Modules. This does not mean your performance will go up though. IF your upgrading because of performance the SP may not be able to handle the extra IO because it was not originally sized for the larger IO load.
cwill200sci
7 Posts
0
August 12th, 2015 09:00
The VNXe3100 4GB SP memory is upgradable.
Upgrading VNXe3100/VNXe3150 Memory
Charlie
IaKK83AaCI12227
29 Posts
0
August 12th, 2015 10:00
My apologies and this is news to me!
I stand corrected...
LYSJR
1 Message
0
May 13th, 2016 11:00
Charlie, I've been digging around looking for more information on the 10GB upgrade for the VNXe3100 but haven't found anything concrete. Would you be able to provide a part# for the IO module you reference? Are the modules 10GB over copper, or optical?
Thanks in advance.
Rainer_EMC
8.6K Posts
0
May 14th, 2016 16:00
the only 10G io module for the 3100 is a 2-port 10Gb/s copper Ethernet
probably V2-10GB-ETH-C