Unsolved
This post is more than 5 years old
1 Rookie
•
36 Posts
0
990
front end port on new VNX
Hi
on the VNX5300 there were 4 onboard FE port which only 2 was usable for host connection because 2 were taken for DM fiber connection if the array was Unified or file only, can anyone answer if i same goes for VNX5200 and VNX5400?
i see that the four port are not onboard but an I/O card that comes with the storage processor as standard.
BR
Ingvar
Rainer_EMC
8.6K Posts
0
October 28th, 2013 07:00
Hi,
the ports on the SP for the NAS data movers aren’t reserved any longer.
If you buy a block-only model and you’re sure you don’t want to upgrade to Unified then you can use all ports.
Obviously if you buy a file or unified model then these ports are used by the data mover(s)
Rainer
ingvar oskarsson
1 Rookie
1 Rookie
•
36 Posts
0
October 29th, 2013 06:00
Thanks Rainer for quick answer.
BR
Ingvar