Unsolved
This post is more than 5 years old
8 Posts
0
2002
how to disable the Access Loxig or Storage Group in VNX 5300 Block
how to disable the Access Loxig or Storage Group in VNX 5300 Block?
Tried using naviseccli –h SPA sc_off, it is not working.
Please let me know.
Thanks.
umichklewis
1.2K Posts
0
October 22nd, 2012 08:00
The first question would be, "why would you want to do this?" By default, Access Logix is enabled on the array to limit access to different LUNs/hosts. If you're running a VM environment and want to share LUNs between clusters, that can be (easily) done without disabling Access Logix.
PrakashR
8 Posts
0
October 23rd, 2012 05:00
This VNX will be Fiber attached to IBM SVC, so no host will be conected to VNX. They currently have CX3 and CX4 which are running without Access Logix and the customer wants to keep it in the same way. That's is the reason we want to disable the Access Logix in VNX.
JonK1
247 Posts
0
November 7th, 2012 07:00
Did you remove all existing storage groups prior to running that CLI command? What is the error the CLI is returning?
PrakashR
8 Posts
0
November 26th, 2012 07:00
EMC Engineering said, In VNX series Access Logix can't be turned off. It's factory enabled setting.
bob12344234
11 Posts
0
September 27th, 2013 06:00
Hi Prakash,
Is there any internal engineering mode option to disable?
Apparently best practice recommendation with a SVC in front is to disable and this answer is causing some grief at a customer site.