Unsolved
This post is more than 5 years old
13 Posts
0
923
Is there a Best Practice guide to Integrate VNX with VPLEX Local/Metro?
Hello All,
I am looking for some key points which can guide me on how to integrate VPLEX with VNX.
Is anyone aware of such a document?
jennyvus
1 Rookie
1 Rookie
•
30 Posts
1
October 21st, 2013 08:00
Hello there,
There are some documents that cover the overall architecture and design (see insert White Paper) but specific procedures are normally foung in the Implementation Best Practice Guide for EMC VPLEX. There are some references to VNX in there. All other procedures as it relates to encapsulation, etc...are found in the procedure generator.
Thank you!
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/White_Paper/h11225-VNX-VPLEX-use-cases-wp.pdf?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tDb250ZW50RXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwNmMxMjEzLGRvY3VtZW50VHlwZT1wZGYsbmF2ZU5vZGU9MGIwMTQwNjY4MDRkZjBhOV9Hcmlk
Vaibhav2025
13 Posts
0
October 21st, 2013 09:00
Thanks Jenventullo,
I have read these documents and they are very helpful.
But I am looking for more specific tuning parameters, like what should be the page size on the VNX?
Currently it is set to 8KB, but the VPLEX works at 4KB, so setting VNX also to 4KB will be helpful or not?
And such other parameters...