I have configured a 3 node cluster on Ubuntu 16.04. The original plan was to have a converged cluster with all machines acting as both SDS and SDC. When installing, the Installation Manager correctly went through the process of installation with no errors reported even with the SDCs. However, the GUI displays 0 defined SDCs.
I have manually tried to add SDC with the following steps:
1. In new host (22.214.171.124), dpkg -i EMC-ScaleIO-sdc-1.32-2451.4.el6.x86_64.deb
2. In MDM, scli --add_sdc --sdc_ip 126.96.36.199
3. In new host (188.8.131.52), modify /bin/emc/scaleio/drv_cfg.txt, to specify MDM IP
4. /etc/init.d/scini restart
After attempting the final command of restarting the scini service, The error below is received:
I have used ScaleIO scini.ko kernel version mismatch as a reference guide as the issue is somewhat similar, although the output of the /etc/init.d/scini start command is slightly different. Assuming it is the same kernel version mismatch problem I am also unable to find the required correct kernel version file for scini.ko. I am currently running 4.10.0-35-generic and am unable to find that version within ftp://ftp.emc.com/Ubuntu/
My drv_cfg.txt file contains the following:
#Configuration file for the kernel module.
# One line stating the client GUID.
# Additional line for MDM (Meta-data servers)
The MDM entries are correct as these are my primary MDM and secondary MDM.
The other file I have attempted to edit is /bin/emc/scaleio/scini_sync/driver_sync.conf with the following information:
repo_address = ftp://ftp.emc.com/
repo_user = scini
repo_password = scini
module_sigcheck = 0
After attempting those changes, and trying prior to the changes, the problem persists. Appreciate any advice pointing me in the right direction.. Thanks
Is there any particular reason you are using ScaleIO 1.32? It is very old and in 2 months will no longer be supported. I would suggest you to reinstall the cluster using the newest available 2.0.1.x code.
My apologies, I had taken that step by step process from a previous article, whereas in my situation I am indeed using the newest version of ScaleIO.
Any further advice? Thanks
I can't see you kernel version in the repository at all, so that's most likely the cause of why the SDC is failing to install the module. Let me ask around what's the roadmap for 4.10.x.x and I will get back to you.
Yes, I am pretty sure that SDC can't start becuase it can't fetch modules for this particular kernel version - if you can try one of the kernels you can find the drivers for in the FTP repo, that would be great.
It worked perfectly after downgrading the kernel version to one which was within the FTP repo.
Also noticed after doing this that the repo was actually updated today with the 4.0.10-35-generic kernel version which I was after.