Unsolved
This post is more than 5 years old
10 Posts
0
3471
VxRail 4.0 G Series setup
Hello All,
we are setting up our new VxRail G- Series 4.0 with 2 DellEMC S3124 ToR swicthes connected to customer Cisco 2950 series switches uplink. We couldn't reach the VxRail initial ip (192.168.10.200) for setup. we followed the Network physical and logical planning guide.
But one thing we couldn't achieve is to enable IPv6 MLD snooping/and MLD querrier on the VxRail connected ports on DellEMC S3124 switches. The command for enabling MLD snooping was not accpeted on the S3124 switches
Could this be the reason why we couldn't reach the 192.168.10.200? Below is the screenshot of the IP address the esxi hosts are receiving:
Also, VxRail selected VMNIC0 as the management NIC port.
Native VLAN was not used for the management vlan but a specified vlan
Management and VM -Network VLANs were customized (tagged) on each esxi hosts
Still we can't reach the VxRail.
Kindly help on this.
Menno
29 Posts
0
October 12th, 2017 05:00
or setup your host to be able to reach both 192.168.10.xxx and the new VxRail mgr ip. :-)
emc_troy
142 Posts
2
October 12th, 2017 05:00
Steps 5,6 and 7 replace with:
/opt/vmware/share/vami/vami_set_network eth0 STATICV4 10.157.13.XX 255.255.255.128 10.157.13.XX
But one thing we couldn't achieve is to enable IPv6 MLD snooping/and MLD querrier on the VxRail connected ports on DellEMC S3124 switches. The command for enabling MLD snooping was not accpeted on the S3124 switches
Could this be the reason why we couldn't reach the 192.168.10.200?
This will not prevent access to the VxRailManager, but will prevent VxRailManager to discover the ESXi Nodes. Snooping and qurier both have to be aiter enabled, or both disabled.
VincentJansen
67 Posts
1
October 12th, 2017 05:00
Hi Mide
1.Add temp a static ip to the ESXi host
2.Connect vi-client to ESXi host
3. Open console VxRail Manager
4. login VxRail Manager with mystic and su -
5. edit /etc/systemctl/ifcfg-eth0
6. edit /etc/systemctl/routes
7. restart eth0 or reboot vxrail manager
8. ping vxrail manager
9. if ok remove static ip from ESXi host.
10. VxRail Manager is still reachable
Cheers!
Vincent
VincentJansen
67 Posts
0
October 15th, 2017 23:00
Hi Mide,
Did you solve issue?
Cheers!
mide1
10 Posts
0
October 17th, 2017 00:00
Hi VincentJasen,
We plan going back to site this weekend.
Will update.
Thanks
VincentJansen
67 Posts
0
October 17th, 2017 07:00
Hi Mide,
Thank you for the update. Hope it works for you.
Vincent