Start a Conversation

Unsolved

This post is more than 5 years old

20807

March 14th, 2016 12:00

Dell Precision M6700 Nvidia k4000m no display at all after enabling Secure boot

Hi, 

I am having a problem with a precision M6700 with a Nvidia K4000m. I installed Windows 10 Pro in the UEFI mode and Legacy ROM enabled. Later, i enabled secure boot from the BIOS and now there is no display. Tried resetting by removing power and removing CMOS battery. No change.

Need immidiate assistance.

Thanks.

March 14th, 2016 22:00

Sounds like a tough one. Your support site has articles & threads about it.

http://www.dell.com/support/home/us/en/19/product-support/product/precision-m6700/research

Precision M6700 Support site

http://www.dell.com/Support/Article/us/en/19/SLN85632

Computer Does Not Turn On Or Go Into Windows

=== Quote ====

No Video

If the power indications are normal but there is never any video seen on the computer's display during the startup process, this probably indicates a No Video issue.

If you have a desktop computer and the monitor has its own power supply, make sure the monitor has a power indicator showing that it is turned on.

To troubleshoot a No Video issue, click on the links below:

For a notebook, press and hold the Fn key and then press the power button. This starts the pre-boot testing and will launch ePSA. ePSA will test video with a series of patterns. If they look fine but you want to test more, you can respond to the video test with "N" and ePSA will then launch the LCD BIST test. If you have a no video issue, you can either run the Fn+Power to enter ePSA or D+Power to run the LCD BIST.

=== EOQ =====

http://www.dell.com/Support/Article/us/en/19/SLN292599

Resolve No Power, No POST, No Boot or No Video issues with your Dell Computer

http://en.community.dell.com/support-forums/laptop/f/3519/t/19596949

Laptop M6700 Screen goes blank

Cure: Update the BIOS. Also suggests plugging in an external monitor.

No Events found!

Top