Start a Conversation

Unsolved

This post is more than 5 years old

9481

June 1st, 2017 07:00

No bootable devices found after attempting to install windows 10 from bootable USB on Dell Precision 3510

Using DVD with Windows 10 provided by Dell I created a bootable USB in order to install windows 10 on my laptop. 

However, after recovering procedure laptops displays message: 

No bootable devices found

press F1 to retry boot 

F2 for setup utility 

F5 to run onboard diagnostics.

Please help!

4 Operator

 • 

6.4K Posts

June 1st, 2017 16:00

:emotion-2:

Please run the Diagnostic tool to check hardware on the system by following steps below:

1. Power off system

2. Power on system, quickly tap the F12 key continuously until you see Preparing one time boot menu in the top right corner of the screen. In the boot menu, stroll down to Diagnostic and then click it. After quick tests, click on Hard Drive and then Thorough Test Mode. Report back any error code.

3 Posts

June 3rd, 2017 13:00

Any other ideas?

3 Posts

June 3rd, 2017 13:00

I did it. All tests passed!

4 Operator

 • 

6.4K Posts

June 3rd, 2017 18:00

Please power on the system, quickly tap the F2 key continuously. In the BIOS, click Boot Sequence and then check if system is set to UEFI mode and secure boot is enable.

4 Operator

 • 

6.4K Posts

June 3rd, 2017 18:00

And make sure there isn't a check mark in box....

No Events found!

Top