Been struggling with this for days and not sure where to go next. Trying to image a Precision T3610 with SCCM 2012 R2 and run into 0x80070490 or 0x80070057 on the partition step. I've added every conceivable storage\sata driver I could find. Anyone have any ideas on how to resolve this?
Just received the new T3610 from Dell, trying to image via SCCM 2007r2 and I am encounter same error at Partition. 0x80070490 or 0x80070057 . i have added Intel C600 Series Chipset SAS Raid Controller and the Intel Raid Controller SRCSAS18E drivers to boo image. The Funny thing is the USB boot media becomes inoperable after the error occurs. I need to recreate Boot media stick each time.
Need help and guidance is much appreciated
Ok so, I'm having the same issue. We are using PXE boot with a TS (SCCM 2007). The machine boots but as soon as the TS starts it fails with error 0x80070490. The BIOS is set to SATA Operation/RAID On. I've chaged the SATA Operation to AHCI and the TS runs, drivers load but when it get's to "Setup Windows", the machine will reboot then fail with error: Windows\System32\Drivers\megasa2.sys 0xc0000359. I've been banging my head on the desk for a week now and can't seem to make any progress. Any help would be highly appreciated.
So i've managed to get this working. I changed the SATA setting in the BIOS to AHIC. I also added the following drivers to my .wim and driver package: "Dell PERC RAID Virtual Device", "LSI Embedded MegaRIAD", "PERC H310 for Dell Precision" and "RAID Virtual Device". In my task sequence, under my "Apply Drivers" section for my T3610, I selected the "Select the mass storage driver within the package that needs to be installed before setup on Pre-Vista operation system" with LSI Embedded MegaRAID driver and LSI Embedded MegaRAID Controller Driver model. This worked for me. I hope this helps anyone that runs into this probelm.