Taskbar Dell Wyse 5010

Hi, I need a hand sorting out a bit of an issue with regards to showing the TaskBar at the bottom or the top of the display after launching an application.

I've configured the WLX.ini file as shown below:

;*************************************************************
;* General 1 *
;*************************************************************
Rapportserver=10.64.135.208
RapportSecurePort=443
EnableLocal=yes
EnableGKey=yes
DisplaySettings=MON1 rotate-normal default
DesktopTaskBar=top
AutoHide=no
AlwaysOnTop=yes
Update.Preserve_changes=no
Privilege=High
LockDown=no
Panel.NetworkIcon=yes
AutoPower=yes

ShutdownOptions=Logout,Restart

;*************************************************************
;* General 2 *
;*************************************************************
Keyboard.layouts=gb
MouseSpeed=1
RepeatRate=1

;*************************************************************
;* General 3 *
;*************************************************************

SystemURL=www.raildivision.com or Tel: 0800 085 30xx 24hrs.

AutoInstallPackagesUrl="10.64.135.xxx/.../addons"
;NewAddons="remove-cdmallowed_1_all.deb,hagent_5.0.300-00.00_armel.deb,leafpad_0.8.18.1-2_armel.deb,"

;*************************************************************
;* Display *
;*************************************************************
;Desktop=(SET IN DEVICE SERIAL.INI)
; Setting it here corrupts the image regardless of
; file type/size and transfer speed! (26 May 2015)

Screensaver=0
PowerManager=0,0

;*************************************************************
;* Time *
;*************************************************************
Timeserver=10.64.135.xxx
Timeformat="24-hour format"
TimeZone="Europe/London" ManualOverride=yes

;*************************************************************
;* Network *
;*************************************************************
PermitSSHRootLogin=yes
EnableSSH=yes
AddToEtcHosts="10.64.135.xxx sanwdm02.progressrail.xxx sanwdm02;10.13.0.37 sanxxx.progressrail.com sandc1"
Autologin=Yes

ChangeAdminPassword=xxxxxxx

ChangeRootPassword=xxxxxxx=
DisableDomain=yes
DisableVNC=no
UsePasswd=yes
VncPasswd=xxxxxx

;*************************************************************
;* Wireless *
;* *
;* You can create multiple entries here however, only the *
;* LAST entry processed is the one that is auto-used so *
;* remember to list them in the correct order. *
;* *
;* The gotcha is that if the unit is already connected to *
;* another wifi SSID then it will continue to use this until *
;* someone manually connects to the new entry OR that SSID *
;* is not available. *
;* *
;* Previous entries are added into the connection list on *
;* the unit and are selectable by the end user. *
;* *
;*************************************************************

WLAN="PRS Thin Client WiFi" SSID=TC_WiFi Security=WPA&WPA2PERSONAL Mode=Infrastructure Password=xxxxxxxxxxx= AuthType=SharedKey

Exit=All

As you can see above I have removed some details in order not to compromise anything.

Now, the idea is to be able to show the task bar and what ever is running regardless of the logged on user.

It it possible and how do i resolve this issue?

Thanks,

Mark