Unsolved
This post is more than 5 years old
3 Posts
1
39771
D10D Multi Monitor only spanning
D10D Multi Monitor only spanning
I have a WYSE D10D client with the thin OS version 8.0_037. I I am trying to use the multi monitor display to work with the client connecting to a Windows 7 desktop.
Currently the only options I have for using the two monitors are a mirror image or one large spanned image. I would like to get the Windows OS to see both monitors and be able to use them individually for viewing different windows.
What configuration do I need to use in order to use this?
With XenDesktop, the same unit was able to connect via ICA with no issue and no special configuration connecting with the desired multi monitor setup.
Rmontalvo1
623 Posts
0
June 18th, 2015 06:00
Use the following parameter on your WNOS.INI file:
DualHead=Yes \
Mainscreen=1 \
MonitorAutoDetect=Yes
and under the Connect=RDP section, add the following two options:
Fullscreen=No \
Resolution=Default \
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
Rmontalvo1
623 Posts
0
June 18th, 2015 10:00
From the thin client:
Go to Settings > Display > Dual head
Select Span Mode
Go to Remote Connections > Broker Setup
Select None
Select RDP
Click on Configure Connections
Under the Connection tab
Set the Display Resolution to Default
Select Fullscreen on 1 monitor
Press OK to save
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
scottevero
3 Posts
0
June 18th, 2015 10:00
DualHead=Yes \
Mainscreen=1 \
MonitorAutoDetect=Yes
and under the Connect=RDP section, add the following two options:
Fullscreen=No \
Resolution=Default \
Hello Rogger,
Is there a way to configure the options on the client itself?
Currently we removed the DHCP options referencing any INI files stored on our file servers and configured a direct RDP from the WYSE to the virtual Window 7 desktop.
scottevero
3 Posts
0
July 22nd, 2015 07:00
Go to Settings > Display > Dual head
Select Span Mode
Go to Remote Connections > Broker Setup
Select None
Select RDP
Click on Configure Connections
Under the Connection tab
Set the Display Resolution to Default
Select Fullscreen on 1 monitor
Press OK to save
I am able to follow up to choosing Full Screen on Monitor 1.
Attached is an
Is there something I am missing?
Eddie Thrace
37 Posts
0
July 22nd, 2015 07:00
DualHead=Yes \
Mainscreen=1 \
MonitorAutoDetect=Yes
and under the Connect=RDP section, add the following two options:
Fullscreen=No \
Resolution=Default \
Roger,
Is MonitorAutoDetect a supported option? I don't see it listed in the 8.0_37 INI guide.
RustyMonkey
96 Posts
0
July 22nd, 2015 07:00
Looks like you have been hit by the Microsoft update. Go to www.wyse.com/kb and search for document # "24848" for a solution.
Rmontalvo1
623 Posts
0
July 22nd, 2015 07:00
Yes it is. See Table 4, Page 18. It's an option for the DualHead= parameter.
Keep in mind, that the thin client will be in span mode until you connect to your RDP or ICA host.
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
ivovaneerd
1 Message
0
July 22nd, 2015 07:00
iff i select none i cant connect to my broker i need this in rds any way this is posible