Wyse ThinOS

Last reply by 09-21-2016 Unsolved
Start a Discussion
Not applicable
30915

NTLM Authentication Password Reset

NTLM Authentication Password Reset

I am currently using the V10LE with firmware 7.1_033. NTLM authentication works, but the built in password reset does not. When you try to reset the user password, either thru expiration or an administrator selecting "User must change password at next logon", the use is prompted to change the password, but receives the Following error:
SMB: Invalid new password, please retry

I have verified that the new password meets the 2008 R2 domain complexity requirements and has not been previously used. Below are redacted copies of the wnos.ini, mac.ini, and user.ini.

WNOS.ini

Autoload=1
SysMode=VDI toolbardisable=yes toolbardisablehotkey=yes toolbardisablemouse=yes
Privilege=NONE SuppressTaskBar=yes
Device=audio
Desktop=Boat_BNA_bg.jpg Layout=stretch
Language=Us
Timeserver=ADC01
TimeZone='GMT - 05:00'
SignOn=NTLM ConnectionManager=Hide EnableOK=Yes DisableGuest=Yes SaveLastDomainUser=yes
DomainList="MYDOMAIN"
AutoSignOff=Yes Reboot=Yes
ShutdownCount=0
SessionCOnfig=ALL mapdisks=yes
VNCPrompt=no Accept=0
IcaBrowsing=HTTP
Seamless=yes HideTaskbar=1
include=$mac.ini
include=$UN.ini
Exit=All

MAC.ini

TerminalName = II11959
Printer=LPT1 Name="HP Officejet Pro 8600" PrinterID="HP Officejet Pro 8600"enabled=yes
Dualhead=Yes Mainscreen=2
Screen=1 Resolution=DDC
Screen=2 Resolution=DDC
Screen=1 Rotate=right
Screen=2 Rotate=none
Exit=Yes

USER.ini


seamless=yes
PnliteServer=http://XX.XX.XX.XX/Citrix/XPD/config.xml ReconnectAtLogon=0
CONNECT=RDP Host=II08891 Description="II08891 RDP" Fullscreen=yes Username=$UN Password=$PW Domainname=$DN LocalCopy=no
Mouseswap=0
MouseNewSpeed=6
Exit=Yes

Any clue why it is not working?

Replies (3)
2 Bronze
2 Bronze
849

Hi,


Same problem for a customer.

Did you find the solution?

2 Bronze
2 Bronze
849

Hi,


Same problem with FW 8.1_027 !

I tried to upgrade 2 wyse a C10Le and a T10 with the 8.3_011 and now we can't authenticate.

That means if i deployed the last firmware all 400 client can't work !

Help !

3 Zinc
849

You may want to contact technical support on this one for a faster resolution. they can be reached at 1-800-800-9973 option 4 or at our Self-Service portal at www.wyse.com/kb

Roger Montalvo

Latest Solutions
Top Contributor