Unsolved
This post is more than 5 years old
15 Posts
0
123696
--Resolved-- Poor RDP performance with T10
--Resolved-- Poor RDP performance with T10
Hello,
As a customer of Wyse, we have T10 which 500 pcs installed on WTOS7. We had lots of problems related to usb redirection, numlock capslock sync on WTOS7 with Windows 8. We've passed all of our problems to Wyse Customer Support and they back to us to wait for WTOS8.
And WTOS8 finally released and solved all the problems we had before but this time it occured the RDP performance isssue!
Our beta environment as below:
Thin Client = Wyse T10 with WTOS 8.0.30 firmware
Target OS = Windows 8 VM on Hyper-V 3.0
Target OS Hardware = 2 vCpu, 4GB DynamicMemory, 60GB HDD
Connection Method = RDP; no any broker service!
Network BW = 100mbit
We have issue that with above configuration is very poor performance of the RDP 8.0 with WTOS8. But there is no rdp performance issue on same configuration except WTOS 8. WTOS 7 RDP experience is good. We've record a video for a better understanding of the issue. As seen in the video T10 Cpu is riding high load with every Windows 8 gui interaction!!! This problem didn't have WTOS7.
yebiw
2 Posts
0
June 19th, 2015 04:00
hx! brother! i love u! muhhha. ^^
ibrahimakgul
15 Posts
0
June 19th, 2015 04:00
An Example from my wnos.ini as below:
;************************************************* ************
;* RDP *
;************************************************* ************
SessionConfig=RDP USBRedirection=TCX DefaultColor=2 EnableGFX=no EnableUDP=yes EnableNla=NO
sneakyowl
2 Posts
0
June 19th, 2015 04:00
This is NOT resolved in the latest WTOS for the T10 models: 8.0_210
Performance is unbearable towards 2012 R2 servers, so I am currently using 7.1_207