Unsolved
This post is more than 5 years old
2 Posts
0
6541
--Resolved-- RFID Setting gets changed using RFID Reader 6082AKU - Firmware 11.6.2
--Resolved-- RFID Setting gets changed using RFID Reader 6082AKU - Firmware 11.6.2
RFID's card readers have a setting "Read only cards with this bit count (26). This is NOT checked by default out of the box.
After booting the V10L with the card reader attached, this “Read only cards with this bit count (26)" gets checked (SET) now our cards no longer work.
Have a picture of the Advanced Settings tab if needed from a PC.
Fly_wu
3 Posts
0
June 23rd, 2015 07:00
As per Dev, this will be fixed on next BETA build. Thanks.
JohnAtkins
129 Posts
0
June 23rd, 2015 07:00
Hello Brian,
This has been fixed and can be validated with 8.0_033 build posted above.
Thanks
John