Unsolved
This post is more than 5 years old
42 Posts
0
14288
Re back OS Image to the Reference Device ?
Re back OS Image to the Reference Device ?
Hello
We have an applecatios must modefy it on Local hasd Disk not using PXE Poot so we want to re back the os image to the RD but we have alot of batches.
How can we re back the OS Image after batching to the Reference Device to modify it ?
Thank You
mhaase-2015
200 Posts
0
June 4th, 2015 05:00
The process to restore a captured OS Image is called "Reverse Image Capture" and is described in the WSM Sizing and Planning Guide at page 78.
After you have restored the currently streamed OS Image to the disk of your Reference Device you can apply any changes you want. Once you are done, capture a new OS Image.
Mobile Mode does not work because you cannot capture an OS Image from a device which is currently provisioned.
#Iwork4Dell
eirirs
63 Posts
0
June 4th, 2015 05:00
My suggestion: Use Mobile disconnected mode, and provision the OS image on a harddisk.
Bazzoka
42 Posts
0
June 4th, 2015 07:00
Thanks All