mudcow007
1 Copper

Help!! cant reimage S90 clients

Help!! cant reimage S90 clients

hello all

this is my first bash at reimaging S90's

i have set up an old 2000 server, installed DHCP an IIS.

Connected server to switch an S90 to switch

installed simple imager an installed the correct image from the wyse site

power on S90

it connects to server an i see the log on the server screen but within a min or so i see an error

the thin client then reboots an it starts over

anyone any ideas?

thanks

0 Kudos
7 Replies
mudcow007
1 Copper

RE: Help!! cant reimage S90 clients

just another note the part number of my clients is

902115 - 02L

if that helps at all

Tags (2)
0 Kudos
Rmontalvo1
3 Silver

RE: Help!! cant reimage S90 clients

Try using a dumb hub instead of a switch.

 

 

 


Roger Montalvo 
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]

Tags (2)
0 Kudos
digitad
1 Copper

RE: Help!! cant reimage S90 clients

I get the same results as you only that I have P/N: 902099-05
Please update thread when you find any solution.
best regards

0 Kudos
aleena-2015
1 Copper

RE: Help!! cant reimage S90 clients

yes , kindly post the solution

 

 


If hankering after pass4-sure.net preparation wikipedia program to hit success on first try plus gain additional knowledge for next Stanford University . if you needIBM good luck

Tags (2)
0 Kudos
RustyMonkey
2 Bronze

RE: Help!! cant reimage S90 clients

Review the WSI guide and make sure you don't skip or change a step. Both WSI and the S90 have been discontinued for several years, so you may not be able to get much help.

Tags (2)
0 Kudos
Highlighted
bryguy21
1 Nickel

RE: Help!! cant reimage S90 clients

it took me forever to get this working. Make sure the firewall on the winterm is disabled. You have to hold down shift, enter the default login Administrator/Administrator. In this mode you can also disable the write protect filter (click on red icon). At this point go to control panel > settings. You'll be able to go into the firewall. Disable it.

Tags (2)
0 Kudos
naitik1
1 Nickel

RE: Help!! cant reimage S90 clients

So anyone with the solution..?

Tags (3)
0 Kudos