S30 SX0 Wyse terminals do not set time correctly
We supply & maintain Wyse units at various different sites that then connect to a Windows 2008 R2 terminal server, and we have noticed a problem with our S30 SX0 units that when powered off the time rolls back to August (not 100% on the month but I believe this is it) 2006. I believe this is because the units do not have a CR2032 (or equivalent) button battery to keep the clocks going after they have switched off, from what the Wyse website says.
This wouldn't be a problem were it not for the fact that Windows Server 2008 requires clocks to be accurate on a connecting device to allow it to log onto the server - one site had a power cut last week and were very displeased at having to reset the time on 15 Wyse units one by one. Is there some configuration setting to ensure that the units can pick up the correct current time when powered on, if they are are already correctly configured for network access; or even to save the current time so if they are switched off and then back on, they are merely minutes or hours out, and not years (a discrepancy Windows Server 2008 can get around)?
As 2008 R2 is the current up-to-date Microsoft server OS and requires an accurate time setting, to supply a working product without a battery to ensure this, there has to be a way of keeping the time right. Anyone know what this setting might be?
Please review the following knowledge base article for an answer: https://support.wyse.com/OA_HTML/csk...qe6EoJhKziN33g..
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
Since you are a super moderator, and are most probably very knowledgeable, would you consider to include the answer "it is just not possible to save the time when you switch off the SX0 devices" and save everybodys time in going to the posted link that does not add valuable information?
Have a wonderful day!