I used the Wyse USB Firmware Tool and created a USB that is supposed to Pull the Firmware off of a Wyse so that I can then Push it onto another unit which has completely lost it's firmware.
I am following the directions to the t on how to Pull the Firmware, but at no point am I receiving or seeing anything during the boot up. The unit powers on and then goes straight to the main screen. I have tried this USB on a 3150 and with this unit I do reach a point where I can pull the Firmware off of it.
Those hardware platforms do not support USB boot. The support hardware list from the USB firmware admin guide: • Windows CE (v5.x or v6.x): CAUTION: For devices running Windows CE, only the Copy option (to pull a firmware image from a source device and then push that image to a target device) and the Replicate option (to duplicate an already configured USB key containing the contents you want from a source device) are supported (the Update option is not supported). · C30LE · S30 · V30 · V30L · V30LE