yetimax
1 Copper

Pink screen after Xenith Firmware 1.7 upgrade

Pink screen after Xenith Firmware 1.7 upgrade

After upgrading firmware from 1.6 to 1.7, the secondary screen is pink (see attached picture). The Xenith is setup with a split with a DVI cable to primary monitor and VGA to secondary monitor. It strangley doesn occur after the first reboot but after the second.

I've stripped out the xen.ini to almost nothing and seen it occur on 10+ devices so it appears to be firmware related but maybe an ini setting will resolve it. I've played with the refresh rates and resolutions as well.

Any ideas?

Tags (3)
0 Kudos
3 Replies
yetimax
1 Copper

RE: Pink screen after Xenith Firmware 1.7 upgrade

For those, that may run into this screen corruption issue. Just add this to your ini prior to updating the firmware.

AutoSignoff=yes Shutdown=yes
ShutDown=turnoff

It appears to prevent the video driver from getting corrupt on shutdown.

Tags (1)
0 Kudos
Hellerfl
1 Copper

RE: Pink screen after Xenith Firmware 1.7 upgrade

Hello yetimax,

i had the same problem with Version 1.7 an build 33 or 34.
Now we use Version 1.7 with build 37 and it works fine.

Tags (1)
0 Kudos
Highlighted

RE: Pink screen after Xenith Firmware 1.7 upgrade

I don't have access to the latest firmware and having connetions issue, could you post the fixes included in V1.7_037 please.

Thanks

Tags (2)
0 Kudos