Recently we have obtained 2 of the DX0D models, an upgrade from the RX0L models we had previously. We are using a Citrix environment using the terminals as zero clients.
Once we setup the dual screens everything seems to be going well. Then if we reboot only 1 screen will turn back on, which is the one plugged in via display port (with the display port to DVI adapter). The Screen connected with VGA does not turn on and will continue to stay off even if we unplug it and plug it back in. However, if we unplug the VGA cable and THEN boot up the Xenith box THEN when the first screen turns on, we plug in the VGA cable for the second screen, it then turns on and works with dual screen.
If we leave the display port unplugged and leave the VGA in and boot up then the screen is fine and turns on from boot up being plugged in, it only seems to not work when the display port to DVI screen is plugged in at boot.