Highlighted
mountschool
1 Copper

Xenth Bios

Xenth Bios

I have been trying to find a way to make the xenith power on after power failure ( people keep switching wall plug off) but xeniths are in tray under desks.

today one was at a bios screen so using Fireport as password i changed bios to power on ater failure

How do i get into bios on other 59 xeniths cant figure it out

Tags (2)
0 Kudos
2 Replies
DaFishe
2 Bronze

RE: Xenth Bios

to access the BIOS

To access the BIOS power off the unit.. hold down the Delete key while the device boots.
it will boot into the Xenith firmware, then reboot into the BIOS screen prompting for a password.

Tags (2)
0 Kudos
hangulo1
3 Argentium

RE: Xenth Bios

Keep in mind you have to unplug the power source from Xenith, only then on next boot will you have access to BIOS. Xenith is optimized such that we dont run the BIOS on every restart since hardware is already initialized (we only run it when power is first plugged in).

Tags (1)
0 Kudos