Unsolved
This post is more than 5 years old
57 Posts
0
175914
Hard Reset of P25???
Hard Reset of P25???
Hi,
I have a P25 that someone has messed with the display. It is turned 180 degrees and I can't change it back because I can't seem to click on the Apply or Ok button because the way it is turned.
Is there a way to hard reset this to factory default?
Any help would be great.
Thanks.
Rmontalvo1
623 Posts
0
May 13th, 2015 07:00
Go to www.wyse.com/manuals and search document number 20735
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
shawnubis
1 Message
0
June 12th, 2018 10:00
Links don't work. Why don't you just say how to do the hard reset?
RMontalvo
560 Posts
0
June 14th, 2018 10:00
Shawnnubis,
You are looking in a three-year old thread and the links since then have moved. Attached is the process.
OSD: Reset Settings
The Reset page lets you reset configuration and permissions to factory default values stored
in flash memory. You can access this page from the Options > Configuration > Reset menu.
Note: Resetting parameters to factory default values does not revert the firmware or clear
the custom OSD logo.
MX4CC
7 Posts
0
November 26th, 2018 10:00
Hauser1983
1 Message
0
November 26th, 2018 10:00
Roger,
I know this is an old post but is there a way to do if that reset is locked? The password on the device no one in my department knows and was hoping there is a physical reset possibility to factory but have not found any documentation.