I would greatly appreciate any help to find a new/better 3rd party cooler for my XPS 8940. It came with the thin and small stock cooler and is overheating the whole time. I got a i9-10900 processor with 128 GB of RAM and I need this computer to generate some GIS layers. These jobs take 2-4 hrs every time and I can see that the processor is throttling or C° 97+ all the time.
I tried the Noctua 15S but the problem is there is no space for the bracket under the motherboard. The stock fan screws directly into the chassis from above.
Thank you very much
Solved! Go to Solution.
After a quick Google, the error code you posted appears to be related to a problem with the CPU cooler / fan. Check that the fan is plugged in correctly and spins when you attempt to start the computer.
Also did a thorough search on google and with Dell technical support.
CPU fan was connected to motherboard in the correct spot. It was spinning with my modified fans, and was also spinning when I got the stock CPU cooler back in.
I swapped around a lot of things and the error persisted.
Thanks for your sharing.
I just got the NH-U9S on my pc.
I just plug in the port of the CPU fan on the motherboard, and there is no problem when I boot on the machine.
It works well. The temperature of the CPU is under 70 degrees when it is fully loaded.
Thank you to everyone who has contributed to this thread, it's been very helpful. Like everyone else, I was disappointed to see the tat pancake cooler on my i7-10700 (non-k).
I can confirm that Arctic freezer i13x fits easily with no extra screws required. The standoffs supplied with the cooler screw directly into the mounts used by the dell 'cooler'.
Then fit the rest of the mounting kit
Hardest part was getting the fan cable on the header - need smaller fingers.
Not had any bios errors when booting, using the latest bios 2.0.11 i think.
Like others, temps have gone from 100degC and cores thermally limiting to max 80-ish under stress test with the CPU clearly maintaining a higher boost multiplier throughout. Oh and barely audible.
@dhufto That's good news. My Arctic Freezer i13 X CO arrived today and I'll be fitting it soon.
I've already replaced the original exhaust fan with an Arctic F9 PWM and I've now fitted an Arctic F12 PWM in the front HDD location using a 3D printed mount made to the design by @purpledrillmonkey (costing £5.94). I thought the F9 was quite loud, but since adding the F12, the overall noise level has dropped.
For those interested, the GeForce RTX 2060 temperatures have not changed since fitting the F12 at the front.
Its done, thanks Community
My Black Beauty NH9S Chromax Black edition is installed and tested.
Case fan is currently the standard Dell one (update not needed at the moment).
Room temp 20°C
Temperatures during gaming 64°C (BF5)
Temperatures during normal operation 34°C
Also updated to Noctua fans (NH-U9S). Huge improvement. The noise of GeForce 1650 Super is not good / not bad. Unfortunately the fan in the PSU is super noise. Can somebody confirm that? Any recommended replacements for PSU fan?