XPS Desktops

Last reply by 09-19-2022 Solved
Start a Discussion
2 Bronze
2 Bronze
148

XPS8940 no longer outputs/displays to 2 displays (via HDMI and Display cable)

Up until a week or two ago, I was able to output to two displays (via HDMI and Display Cable) from my XPS8940.
However, now I can only output to one display (either the display at the end of the HDMI or the display at the end of the Display Cable).
The OS and BIOS are up-to-date. I have looked at the following, and it seems to me that it is possible to output to two displays at the same time.
https://www.dell.com/support/kbdoc/en-us/000052929/video-display-and-multiple-video-display-general-...

If you have any idea what the cause might be, I would be very grateful for your comments.

Solution (1)

Accepted Solutions
2 Bronze
2 Bronze
142

Sorry, it was a basic setup issue.
The "Extend display screen" setting in the control panel's multi-display settings was not properly configured.
The problem was resolved by reverting this setting.

View solution in original post

Reply (1)
2 Bronze
2 Bronze
143

Sorry, it was a basic setup issue.
The "Extend display screen" setting in the control panel's multi-display settings was not properly configured.
The problem was resolved by reverting this setting.

Latest Solutions
Top Contributor