I have a Dell XPS 15 9550 Laptop which has just been subjected to a Windows 10 April 2018 update yesterday, which appeared initially to have loaded without problems, and the computer continued to behave as normal. I then shut down for the night.
However this morning, after initially booting normally, it opened with a MS Edge window which was blank and apparently trying to download something. No response on screen to any key press. After leaving it hanging for a minute, I pressed Ctl+Alt+Del and Task Manager started, but greyed out. No response on screen to any key press, so I closed the computer down by holding down the Power button. Hard disk stopped.
On starting up again, screen displayed Dell logo in middle and a series of checking messages in top left corner of the screen. After about 20 seconds I heard the normal Windows start-up noise, but black screen except for the mouse cursor as a small circle, which I could move OK. No response on screen from pressing any key, including Ctl+Alt+Del.
I have repeated the shut down /start up sequence a number of times, but still get the same result.
Does anyone have a recommended fix for this?
BIOS Version 1.7.0 Service Tag <Removed per policy>
As far as I know all automatic Dell firmware updates are up to date.
(I am typing this on my wife's computer which has not yet had the current Windows 10 update, as I cannot access my Dell laptop.)
Thanks for posting. Apologies that your system is not performing as expected.
We have a team that is gathering information about this issue and sending it to Microsoft.
Could you please contact me by Private Message and include the following information?
City, State, Postal Code
Service Tag Number
The only part of the system that I am able to access is the BIOS during initial bootup using one of the function keys.
I ran the ePSA or PSA Diagnostics on the computer hardware, and this gave no faults or error messages.
From doing a bit of browsing on Google, I see that other people are also having problems with this update. I get the impression that it is likely to be some sort of conflict with the display drivers. I have connected an external screen to the laptop via an HDMI cable. This connects OK, but displays exactly the same as on the laptop screen, a small rotating circle, which I can move via mouse or track pad.
Is here any way I can determine which drivers are installed, either via the BIOS, or some other way of not using Windows? Old DOS system maybe?
Do you know if there is any way that I can revert to the previous version of Windows 10, possibly by booting from a USB stick?
I had the same problem after the update following the boot and before windows appears it immediately goes to black screen. I ran ever scan tool recommended from the command prompt, the only place I can get to and no hardware errors were found. Used you media creation tool and I worked for 5 min and while in setting it went to black screen again. Redid the reset NG Reformatted the drive and did the reset NG. Tried to do the reset wipe failed. This is killing me, I use this in my business everyday and I'm totally out of business. Its a brick and only 1 1/2 years old. Looking online We're not the only ones!
Inspiron 5759 Change product
I'm facing a similar issue. My workaround for now is to boot Windows in safe mode, go to Device Manager, uninstall Intel HD display drivers and restart computer. The Windows will load up fine the next time.
Note that Windows will automatically reinstall Intel HD drivers after restart. If you happen to shut down / restart computer again, the black screen issue is back.
Same issue here on my XPS 15 9560... It seems to be the NVidia Display driver, because when i deactivate the NVidia graphics in device manager it works... But I haven't bought the Dell XPS 15 to just use the Intel graphics...
Either Intel driver or latest Nvidia driver is causing that issue.
I installed the latest Intel graphic driver and it resulted in black screen. When I install the latest Nvidia driver I get the same error.
Also the error may vary. Sometimes it's a black screen. Sometimes it's impossible to switch to the Nvidia card, even when forced.
Also when I had black screen after the Intel driver update I plugged in a external monitor at the HDMI port. Then I got a picture on the external monitor. There I saw several errors regarding "failed to initialize Intel HD driver" (or similar).
This workaround won't work every time, also it happened that the screen kept black.