I've also really huge problems with external monitors with the WD15 docking station (reported here in German: https://www.dell.com/community/XPS/XPS-13-9300-mit-WD15-und-2-Monitoren/m-p/7624531#M5586)
Has anyone already the chance to test the XPS with the WD15 and two monitors connected by DP and HDMI?
hello @jweiss15 welcome to our thread.
Which XPS 13 9300 BIOS do you have installed 1.0.11? If so then try again to get the BIOS version 1.0.6.
So that your embedded controller gets version 1.0.1 again.
If that's the case, plug your WD15 into the right side and try your luck with the monitor settings.
Then you can also try to provide your WD15 with a firmware update, if I would rather say downgrade.
If you need help how to get back to BIOS 1.0.6 under windows 10 don't hesitate to ask here to know how to do it. 🙂
and I sincerely hope that Dell soon comes with a sustainable solution.
Thanks for your hints! Yep I've 1.011 installed - could you provide me with some instructions how to do this downgrade?
Also I'm asking myself why it matters if its plugged into the left/right side?
And I made today an interesting observation: I tried a live ubuntu system from an USB-stick and here everything worked out quite well (the 2 monitors with the right resolution / refresh rate were detected. That was quite suprising for me^^)
Hi @jweiss15 ,
go to device manager click on firmware then right click to update drivers.
Now click on search on your computer.
Choose from a list and see if there is any system firmware 1.0.6.
if that is the case you select the system firmware then you install the BIOS update from the Dell side.
your system reboots and flushes the bios as far as it can Intel ME will make mistakes but that's ok.
the embedded controller will then have version 1.0.1.
and you are back to version 1.0.6.
if you don't have the driver you can download and unzip it here.
Dell, Inc. - Firmware - 0.1.0.6 Windows 10, version 1809 and later, Servicing Drivers Drivers 3/18/2020 N / A 12.6 MB
only then import and play through the points from above.
With Ubuntu other drivers are loaded because standards are really used. there you have no forced BIOS updates via Windows Update.
Hello everyone I tested the whole thing with linux and it is like Windows so we can really assume that the firmware from Dell has really big errors or weaknesses even under linux the same errors occur.
See the screenshot
all these cables work perfectly with another XPS 13 9380
I finally gave up waiting for Dell to fix their firmware/drivers, and bought this adapter instead: https://www.amazon.co.uk/gp/product/B00X4S5C7G/
It arrived today and I can confirm it works fine with my XPS 13 9300 even with the latest BIOS, unlike my original cable (this one: https://www.amazon.co.uk/gp/product/B075V5JK36/), which still doesn't work on the XPS, even though it works fine on a MacBook.
Ridiculous that I'm having to waste money on buying a second accessory just because Dell are taking so long to even acknowledge they broke the functionality with a software update.
I installed BIOS v1.0.10 and v1.0.11 .
The XPS-13 itself (and also my little Mokin USB-C dongle) seem to still be working fine.
Hi @Tesla1856 ,
that your Mokin USB-C dongle continues to work really well.
Unfortunately your Mokin USB-C dongle will not support 144Hz or even 240Hz for a monitor like a USB-C DP or HDMI adapter does.
So the question remains why Dell is not sharpening here for all affected customers.
It cannot be the goal to buy 100 adapters where exactly one adapter works and offers me 60Hz on a 240 Hz monitor.