This post is more than 5 years old
40 Posts
0
1530
XtremIO 4.x support with hp-ux 11.31
Hello Everyone:
Please, could someone tell me if now we have support of XtremIO 4.x with hp-ux 11.31 ?..
Any information about is very welcome.
Regards,
Octavio Guerra M.
echolaughmk
522 Posts
0
October 13th, 2015 05:00
My understanding from having to deal with this right now is that the support timeline is not a definite one at the moment. It will likely be supported in the near future, but I have not received any firm dates as to when at the moment. I would contact your EMC account team and have them deal with the RPQ route unfortunately. In my case, we are reinstalling/downgrading to 3.x in order to provide support for HPUX 11.31.
HTH,
-Keith
OctavioG1
40 Posts
0
October 13th, 2015 10:00
Thank you Keith ...Also, we're working in reinstalling versión 3.x
Kumar_A
727 Posts
0
October 13th, 2015 20:00
We are testing a fix currently and should be able to provide an ETA for it soon. In the meantime, you can have your EMC account team submit an RPQ so that we are aware of the requirement.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 1st, 2016 12:00
Is there any update regarding the ETA for the HP-UX fix?
Thank you!
Mark
echolaughmk
522 Posts
0
February 1st, 2016 13:00
This is supported with 4.0.2, but only with native MPIO and not PowerPath currently. The SSM has been updated to reflect this.
-Keith
Kumar_A
727 Posts
0
February 1st, 2016 16:00
That’s correct. And we are actively working on the PowerPath support as well. If you need this support – feel free to ask your account team to submit an RPQ for this.