Unsolved
1 Rookie
•
3 Posts
6
143
AW3225QF, any update on next firmware?
VRR flicker is pretty unbearable, would love to see it addressed in the next firmware update similar to how you guys handled the last AW3423DW firmware update. The community has also been begging for a DSC toggle and a fix to the HDR1000 EOTF curve.
Petrarca22
1 Rookie
1 Rookie
•
10 Posts
0
October 13th, 2024 15:41
:)
DELL-Nat M
Community Manager
Community Manager
•
2.8K Posts
0
October 15th, 2024 14:40
Hi everyone,
The engineering team has provided a response. Please review the information below and assist where possible:
Thanks a lot for providing the feedback to us, from the post we understood that there are 3 issues that are reported.
While we appreciate the efforts you took to highlight the concern could you elaborate each situation and provide steps to replicate. A short video/image will be more helpful here.
Vanadiel
6 Professor
6 Professor
•
6.5K Posts
1
October 15th, 2024 16:08
1. Texture flickering when using variable Refresh Mode, aka G-Sync or Freesync. While some of this is inherent to OLED technology, it's apparently really visible on this monitor.
2 . users want a DSC toggle to turn off DSC so they can use Nvidia DLDSR. DLDSR/DSR does not work with DSC on, and DSC on this monitor is always on making it impossible to use a lower resolution for performance, and upscale using DLDSR/DSR.
3. Tell them to read this thread. It explains it very well, including third party measurements with spectrometers from a reputable monitor review site (RTings). They should be able to see the problem with this curve if they use their photo spectrometer in the lab. It's pretty easy to measure this.
The P1000 Luminance line falls off after 258 nits, and drops well below the certified HDR400 luminance after 258 nits as the overall APL area (in %) increases. There was an answer a while ago this was due to Samsung (screen manufacturer) requirements, but that would make the HDR400 mode outside of panel manufacturer requirements so that makes no sense.
(edited)
dubeux
1 Rookie
1 Rookie
•
15 Posts
0
October 18th, 2024 14:18
Two points to check:
After the firmware update M2B105, soundbars are no longer turning on along with Windows when using a DisplayPort and HDMI combination. However, HDMI/HDMI works well. This behavior was not present in update M2B104.
After changing some settings in Creator mode in SDR, the brightness reports, for example, 95%, but the screen appears too dim, like it's at 15%. When you increase it to 96%, the brightness is fixed. This happens when the PC is in sleep mode or when quitting games. See this post.
Sharur
1 Rookie
1 Rookie
•
1 Message
0
October 29th, 2024 20:17
Using 240 Hz refresh rate on Mac OS causes intermittent Kernel panics, forcing users to use 120 Hz to prevent daily system crashes (and VRR flicker).
Coelijoeli
1 Rookie
1 Rookie
•
5 Posts
0
November 1st, 2024 13:28
@DELL-Nat M Is there any more information the engineering team needs?