UNSOLVED

Tom12227

updated

1 month ago

T

Tom12227

1 Rookie

•

2 Posts

•

7 Points

0

363

August 12th, 2026 07:35

AW3926QW: Dolby Vision not working with Apple TV & UHD Players (Only works on Windows)

Hi everyone,

I am experiencing a frustrating issue with Dolby Vision on my Alienware AW3926QW monitor when connecting external media devices.

Currently, Dolby Vision works perfectly fine when I output from Windows. However, when I connect an Apple TV or a dedicated UHD Blu-ray player, Dolby Vision fails to activate entirely.

I have already done some troubleshooting and can confirm the following:

 It is not an HDMI cable issue. I have swapped and tested multiple certified HDMI cables that successfully transmit Dolby Vision on other displays.

 The video output settings on both the Apple TV and the UHD player are correctly configured for Dolby Vision.

Is this a known firmware limitation regarding the HDMI ports on this specific model when interfacing with standalone media players? Or is there a specific monitor setting I need to adjust?

Any advice or confirmation of a future firmware update from Dell would be greatly appreciated. Thanks!

  • anne_droid

    6 Operator

    •

    2593 Posts

    •

    9553 Points

    0

    0

    Posted August 12th, 2026 10:22

    Hi

    1. Update the monitor firmware

      • Open Dell’s AW3926QW support page.   

      • Install the latest monitor firmware using Dell Display and Peripheral Manager or Dell’s manual firmware package.

      • Dell lists the AW3926QW as a user-upgradable Alienware monitor, and its support documentation specifically provides firmware-update guidance.

      • Only has  -Monitor Driver, Alienware Command Center 6.x- Full Installer 

        and Alienware Command Center 6.x (my error No firmware).

         

    1. Connect directly to HDMI

      • Connect the Apple TV or UHD player directly to one of the AW3926QW’s HDMI inputs.

      • Temporarily remove AV receivers, soundbars, HDMI switches, splitters, capture devices and HDMI extenders.

      • Try both HDMI inputs, because one may have different features such as eARC.

    2. Use a certified Ultra High Speed HDMI cable

      • Use a short, known-good HDMI 2.1 cable marked for 48 Gbps or “Compatible Dolby Vision”.

      • The monitor’s HDMI inputs support HDMI 2.1, HDR and HDCP 2.3, so the hardware bandwidth is sufficient. dell

      • Apple recommends a Dolby-Vision-compatible HDMI cable and provides an HDMI test under Settings → Video and Audio → Check HDMI Connection

    ~~~~~~~~~~~~~~~~~~~~

    On the Apple TV:

    1. Go to Settings → Video and Audio.

    2. Set Format temporarily to:

      • 4K SDR 50 Hz in the UK, or

      • 4K SDR 60 Hz if you are testing at 60 Hz.

    3. Enable:

      • Match Dynamic Range

      • Match Frame Rate

    4. Select Check HDMI Connection.

    5. Play a title that is explicitly labelled Dolby Vision, rather than relying on a title that only offers HDR10.

    (edited)

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • Tom12227

    1 Rookie

    •

    2 Posts

    •

    7 Points

    7

    0

    Posted August 13th, 2026 02:21

    Thanks for the suggestion! I know exactly which settings you're referring to. When I use this exact same Apple TV and HDMI cable on my LG C4, the "Enable Dolby Vision" and "4K Dolby Vision" format options show up perfectly.

    However, when connected to the AW3926QW, those Dolby Vision options completely disappear from the Apple TV settings—it only gives me standard HDR options. This is despite me double-checking that Dolby Vision is explicitly enabled in the AW3926QW's OSD settings.

    To test it further, I played Stranger Things on Netflix. When I play it through Windows, the Dolby Vision logo pops up normally, and the monitor's OSD confirms it's running in DV (not just HDR). But when I play the exact same show through the Apple TV, it only triggers standard HDR.

    Has anyone here actually successfully triggered Dolby Vision on the AW3926QW using an external device like an Apple TV or UHD player? Or is this monitor currently only supporting DV through a PC/Windows environment?

  • Glue85

    1 Rookie

    •

    3 Posts

    •

    11 Points

    9

    0

    Posted September 30th, 2026 12:22

    @Tom12227​ I have exact same issue on third gen and same monitor. Had a 1st gen and while it can’t scale to 21:9 it displayed hdr. I think even though I can select hdr in the option menu on the third gen I don’t think it’s even displaying hdr at all. For sure not in movies. 

  • DELL-ChrisM2

    Community Manager

    •

    1977 Posts

    •

    9922 Points

    6

    0

    Posted October 3rd, 2026 14:57

    Or is this monitor currently only supporting DV through a PC/Windows environment?

     

    The online AW3926QW Drivers & Downloads --> Operating system drop down list shows what is tested/validated by Dell Alienware =

     

    Windows 11

    Windows 10, 64-bit

    Windows 10, 32-bit

     

    #IWork4Dell

  • Glue85

    1 Rookie

    •

    3 Posts

    •

    11 Points

    7

    0

    Posted October 4th, 2026 05:06

    @DELL-ChrisM2​ 

     

    this is completely irrelevant. All drivers are up To date. Please answer the question and stop side stepping it.

     

    why does Apple TV or other devices connected to the HDMI port not detect Dolby vision? We pay so much for a monitor and pay for Dolby vision only for it not to work. Why does Dolby vision not work on Apple TV connected to the HDMI port? Does it only work on windows? That would be a bit silly. 

    (edited)

  • anne_droid

    6 Operator

    •

    2593 Posts

    •

    9553 Points

    3

    0

    Posted October 4th, 2026 13:01

    @Glue85​ 

     

    Hi

     

    I know less than nothing about Apple TV, however the internet does claim to know...   https://support.apple.com/en-us/102339

     

    Dolby Vision is not detected because the entire HDMI signal chain must negotiate it:

     

    source → cable → any switch/AVR/soundbar → TV input.

     

    If any link lacks the required bandwidth, HDMI “Enhanced” mode, or Dolby Vision support, Apple TV falls back to SDR or HDR10. 

     

     

    I find it somewhat ironic that a sound bar stops the video, but I know nothing about the CORE of Apple TV.

     

     

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • Glue85

    1 Rookie

    •

    3 Posts

    •

    11 Points

    11

    0

    Posted October 4th, 2026 13:24

    @anne_droid​ 

     

    in my chain there is no soundbar. In fact I have tested the cable out by taking it and plugging it in to a OLED lg tv and connecting the same Apple TV up and dolby vision works fine

     

    on the monitor setup I have. The Apple TV with the same cable directly plugged into the monitor and no Dolby vision can be detected. 

  • DELL-ChrisM2

    Community Manager

    •

    1977 Posts

    •

    9922 Points

    6

    0

    Posted October 12th, 2026 11:59

    @Glue85​ 

     

    I am not side stepping. The online AW3926QW Drivers & Downloads --> Operating system drop down list clearly shows to all what Dell can and cannot support. Apple was not tested by Dell with the AW3926QW.

     

    #IWork4Dell