Integrated RAID 1 is no longer fault tolerant - VRTX

Hello, could you tell us which update(s) you had completed before you saw this?
Respectfully,

Shared PERC8 (SPERC Slot 9) DELL - Shared PERC8 23.14.06.0013
CMC        3.41.200.202209300499
Main-Board      2.21.A00.201510302495
Slot 1  iDRAC 8   M630   2.86.86.86 (06)
Slot 2  iDRAC 8   M630   2.86.86.86 (06)

Hello, @sunnyadmin

Do you see two SPERC Slot 9s in CMC? It has to. Could you confirm that you see two?

Respectfully,

Hello,

all firmware now is updated. Do you have other event in the CMC logs? 

You can see here how to collect CMC VRTX logs

How to collect CMC VRTX and FX2 Logs via SSH using PuTTY

Also which OS is installed in the servers?

Thanks

$ racadm getsysinfo[J
CMC Information:
CMC Date/Time             = Wed Dec 18 2024 14:03
Primary CMC Location      = CMC-1
Primary CMC Version       = 3.41
Standby CMC Version       = 3.41
Last Firmware Update      = Wed Jun 14 2023 08:45
Hardware Version          = A05

CMC Network Information:
NIC Enabled               = 1
MAC Address               = 50:9A:4C:7F:F8:D1
Register DNS CMC Name     = 1
DNS CMC Name              = WVSUTVRTX
Current DNS Domain        = corp.weyer.pri
VLAN ID                   = 1
VLAN Priority             = 0
VLAN Enabled              = 0

CMC IPv4 Information:
IPv4 Enabled              = 1
Current IP Address        = 10.144.66.26
Current IP Gateway        = 10.144.79.254
Current IP Netmask        = 255.255.240.0
DHCP Enabled              = 1
Current DNS Server 1      = 10.144.65.0
Current DNS Server 2      = 10.6.239.21
DNS Servers from DHCP     = 1

CMC IPv6 Information:
IPv6 Enabled              = 0
Autoconfiguration Enabled = 1
Link Local Address        = ::
Current IPv6 Address 1    = ::
Current IPv6 Gateway      = ::
Current IPv6 DNS Server 1 = ::
Current IPv6 DNS Server 2 = ::
DNS Servers from DHCPv6   = 1

Chassis Information:
System Model              = PowerEdge VRTX
System AssetTag           = 00000
<Private data removed from public view. DELL-Admin>
Chassis Name              = WVSUTVRTX
Chassis Location          = HEATERS, WV
Chassis Midplane Version  = 1.0
Power Status              = ON
System ID                 = 1487

Host OS: VMware ESXi 6.5.0

Hello,
You can try power drain the chassis.
 
then try 1 PERC at the time 
 
if one works, try adding one more and see if redundancy is restored.

Respectfully,