1 Rookie
•
1 Message
0
33
March 4th, 2025 15:52
Replacing a PERC controller's H730P battery on a M-640 Blade
The PERC Controller H730P's battery needs replacement and I have looked online about how to order, replace it on a M-640 Blade, but cannot seem to find a video, and/or documentation showing this.
I have found a video for an M-630, but cannot confirm if this would work.
Could anyone please share this with the battery model number and type, and how to resolve this without any loss on RAID configuration?
Thank you for your time with this matter.
Ciro Saravia
No Events found!
TheMattHatter_17f8db
1 Rookie
1 Rookie
•
30 Posts
0
March 5th, 2025 21:23
The part number for the battery is 37CT1. The type is T40JJ. To swap out the failing battery is fairly easy. There is a plastic housing for the battery that secures the battery to the controller that should pop out, then disconnect the battery cable and remove battery from the housing.
DELL-Young E
Moderator
Moderator
•
4.7K Posts
0
March 5th, 2025 04:37
Hello, have you seen this before?
https://i.dell.com/sites/csdocuments/Shared-Content_data-Sheets_Documents/en/aa/PowerEdge_M640_Spec_Sheet.pdf
Storage controllers Internal controllers: Software RAID S140, PERC9 H330, H730P
Let us know if you have any further questions after the read.
https://www.dell.com/community/en/direct-messaging