Unsolved
This post is more than 5 years old
2 Posts
0
4261
June 22nd, 2018 10:00
VNX5300 POOL offline.
After the move, the VNX5300 does not raise the pool. The status of the pool offline.
When you try to check the result, you get:
write cache disabled
d12 is faulted / removed
How can I return a pool?
When you try to check the result, you get:
write cache disabled
d12 is faulted / removed
How can I return a pool?
0 events found
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
June 25th, 2018 06:00
reseat the disk(s) that it complains about
if that doesnt help open a service request and let customer service help recover
umichklewis
3 Apprentice
•
1.2K Posts
0
June 25th, 2018 06:00
Looking at your output, this is a pool used by the VNX datamover for its filesystems. As Rainer points out, you need to look to see which drive is showing faulted/removed. In your output above, it's complaining about Celerra disk "d12". This is not a physical disk; it's the logical disk (as the datamover sees it), so you need to find out what physical disk is the culprit.
Let us know if that helps!
Karl
Larkov
2 Posts
0
June 25th, 2018 08:00
That's right, D12 is a logical volume
All the disks in the problem pool are in the OK status.
There is a disk number 3 in the deleted state, but it does not belong to any array.
Rainer_EMC
4 Operator
•
8.6K Posts
0
June 26th, 2018 06:00
well - there has to be a reason the pool went offline and the write cache got disabled
AFAIK you cannot fix that yourself and need customer service help
forum posts wont fix that