Solved!
Go to SolutionHL
Htoon Linn
5 Posts
0
1008
December 22nd, 2020 00:00
SCv3020 no ports are cable
I have configured Dell EMC SCv3020 connect with S4148U-On via 16Gb fiber channel.
But I have received the error message "no ports are cabled"
So let me know which configuration need to configure in S4148U-On.
896
1
Posted December 22nd, 2020 22:00
Sounds like a wrong zoning.
Regards,
Joerg
888
0
Posted December 23rd, 2020 02:00
Thanks, Joerg
FC interface coming up after changing switch port profile-3 to default profile-1 and zoning.
889
0
Posted December 23rd, 2020 02:00
Thanks, Josh
SCv3020 FC ports are coming up after a set switch port profile-3 to default profile-1 and zoning.
Let me ask another question?
I have the following components.
SCv3020 (dual-controller)
S4148U-ON = 2 switch
DAC-QSFP28-100G = 2 cable
I would like to use an active/active storage system.
So these two switches need to stack and which protocol should I use?
DELL-Josh Cr
Community Manager
•
9700 Posts
•
43747 Points
905
1
Posted December 22nd, 2020 09:00
Hi Htoon linn,
Which HBA card are you using? Which ports do you have connected? Did you follow the cabling guides? https://dell.to/3mFcYSg
And page 34 https://dell.to/2KLtu5O
Did you set the ports on the switch with a fibre channel profile? Page 259 https://dell.to/3rkBKKJ