1 Rookie
•
14 Posts
0
24
January 28th, 2025 11:10
cant discover any device
hello,
i just installed OME in our network and i can ping idracs but it failed if i try to test any of the protocols, so i cant discover any of our idracs, what coud be the problem.
Running
Using protocol: WSMAN.
Performing connection test to address:
50%
100%
A connection error occurred with the remote device.
Connection failed to the address:
Task Failed. Completed With Errors.
No Events found!
DELL-Erman O
Moderator
Moderator
•
2.7K Posts
1
January 28th, 2025 15:25
Hi,
I would check at first iDRAc credentials, it's important to be correct. Check your port 443 is open and not blocked by a firewall. Ensure OME and idracs are on the same subnet or properly routed. Lastly if you're using IP addresses, try using the Fully Qualified Domain Name (FQDN) instead. This can sometimes fix connection problems.
Dell EMC OpenManage Enterprise 3.9 User's Guide | Dell US
please take a look discovering devices Dell EMC OpenManage Enterprise 3.9 User's Guide | Dell US
Hope that helps!