Unsolved
1 Rookie
•
4 Posts
1
440
January 19th, 2025 00:00
OpenManage Enterprise (OME) 4.3.1 is now available - Replaces OME 4.3
#IWorkForDell
OME 4.3 issue fixed in OME 4.3.1
When applying firmware compliance to selected components, target devices may restart if the firmware compliance report is filtered by the REBOOT REQUIRED filter set to NO and All Items are selected. In this case, the resulting Make Compliant task will apply firmware to all components, regardless of their reboot requirement type.
Please update the instances of OME 4.3 with OME 4.3.1 immediately.
Recommendation to customers who upgrade from OME 4.3 to OME 4.3.1
Delete any scheduled firmware update jobs that were created in OpenManage Enterprise 4.3 from a compliance report that uses REBOOT REQUIRED filter set to NO, and then recreate them in 4.3.1 if necessary. Ensure that no scheduled firmware update jobs are running before proceeding with the upgrade.
Link for new installs: https://www.dell.com/support/home/drivers/driversdetails?driverid=835VY
Link to upgrade offline from OME 4.1, OME 4.2 and OME 4.3: https://dl.dell.com/openmanage_enterprise/4.3.1/full/omenterprise_4.3.1.tar.gz
MM-OME
1 Rookie
1 Rookie
•
4 Posts
0
January 19th, 2025 19:27
Please refer to this too: https://www.dell.com/support/kbdoc/en-us/000270340/openmanage-enterprise-4-3-unselected-firmware-in-the-compliance-report-are-applied-to-targets-causing-unexpected-restarts
CU.Dell.User
1 Rookie
1 Rookie
•
51 Posts
0
February 5th, 2025 23:58
@MM-OME Can you provide detailed steps about how do I upgrade from 4.3 to 4.3.1 (wrt your second download link).
CU.Dell.User
1 Rookie
1 Rookie
•
51 Posts
0
February 6th, 2025 00:33
Just to add, if I go to "Application Settings" > "Console and Plugins," I see "No updates found" (even though automatic updates are on, and the last check was today).
MM-OME
1 Rookie
1 Rookie
•
4 Posts
0
February 6th, 2025 03:41
@CU.Dell.User If online and automatic updates are on, you should see a banner on the landing screen. Looks like you did not the banner. I'd suggesst please open a support case with Dell.
CU.Dell.User
1 Rookie
1 Rookie
•
51 Posts
0
February 6th, 2025 04:02
Well, my server is out of warranty!
MM-OME
1 Rookie
1 Rookie
•
4 Posts
0
February 6th, 2025 04:04
@CU.Dell.User Did they (Dell support) specifically ask for warranty information?
avallk
1 Rookie
1 Rookie
•
5 Posts
0
February 11th, 2025 15:23
I have tried several times to update from Version 4.3.0 (Build 6) to Version: 4.3.1.12 and every time I get a big red banner stating "Skipping this execution because another Console Update Execution task is running, and only one Console Update Execution Task is allowed to run at time." I have disabled every task that I can find and have no running jobs. Not sure what else to do.