Errors in 'XP Mass Storage Driver Reference'

Question

While setting up OSD for a few models, I believe I came across some errors in this sheet.

Running "lspci -nn | grep SATA" on an OptiPlex 980 in AHCI mode came back as 8086:3B22 which appears to be the "Intel 5 Series/3400 Series SATA AHCI Controller", not the "Intel ICH10D/DO SATA AHCI Controller" listed above.

Running "lspci -nn | grep SATA" on a Latitude 6410 and Latitude 6510 in AHCI mode came back as 8086:3B2F which appears to be the "Intel 5 Series 6 Port SATA AHCI Controller", not the "Intel ICH9M-E/M SATA AHCI Controller" listed above.

jpalarchio · Answer

Yes, I started with what was on the sheet and received 0x7b for each; changing to those that I've identified seems to work fine. Thank you for all the info though, it was a good start for sure and quite helpful.

DELL-Warren B · Answer

Depending on what version of the Intel Mass Storage driver you are using, you may see differences in the naming convention of the sub-drivers. Let me know if the stated entries do not work and I'll correct it.

DELL-Warren B · Answer

Which version (Intel version or Dell R#) of driver are you using?

Enterprise Client

Errors in "XP Mass Storage Driver Reference"

Was this post helpful?