Unsolved
This post is more than 5 years old
2 Posts
0
5053
January 30th, 2012 11:00
Setting up VMware View test environment
Hi Guys,
Not sure if this is the right place, I didn't see a VDI section. Anyway, my company has given me the task of researching/setting up a test VDI environment. I would like to know if there are any best practices from Dell I should follow or if you have any suggestions. For this test environment, they are wanting a small group of virtual desktops (50-100). I currently have the following hardware available:
2 - R710
4 - M710
2 - M910
2 - MD3200i
3 - PS6000x
2 - PS4000
Looking at Compellent or Netapp as well.
Is there anything else I may need? I'd like to go with VMware because of our license agreement.
Thanks in advance for your help!
Brent
No Events found!
Lee Burnette1
1 Message
0
January 30th, 2012 14:00
Hey Brent,
Thank you for your post. The gear you have listed looks good and if you'd like I can setup a call to go over the technical specs of your project and see if there is anything else that is needed. My contact info is on a previous email I sent you today. Thank you!
Brent.Andersen
2 Posts
0
January 30th, 2012 15:00
Thanks Lee, I appreciate your offer to set up a call but I am really just looking for any documentation that will aid in this setup (best practice, how-to). I am new to view and just looking for guidance.