UNSOLVED
MD3000i MDSM Client Error
Whenever I try to open the Modular Disk Storage Management Client I get this error
Unable to start because of a file permission error on one or both of the following configuration files: (emwdata_v03.bin and emwback_v03.bin).
You must correct the read and write permission problem for both configuration files before restarting the storage management software.
I can find the emwdata_v03.bin file but I'm unsure what the permissions need to be in the first place. Any help would be great
Thanks
Tim
Unable to start because of a file permission error on one or both of the following configuration files: (emwdata_v03.bin and emwback_v03.bin).
You must correct the read and write permission problem for both configuration files before restarting the storage management software.
I can find the emwdata_v03.bin file but I'm unsure what the permissions need to be in the first place. Any help would be great
Thanks
Tim
Aaron Hamlett
17 Posts
1130
0
Posted October 25th, 2010 12:00
Usually, it means the application was not installed by a local admin account.
You can try to add everyone (with full control) to the permissions list for the md storage manager folder, then launch the app, then close it and then remove everyone from the permissions list and see if that fixes the issue.
Otherwise, log in as a local admin, uninstall it, reboot, log back in as local admin, install it, test.
Log out and log in using your regular account and test again.robert1975
15 Posts
1130
0
Posted December 5th, 2011 08:00
replacing the 'emwdata_v03.bin' file from a working MDSM installation fixed the issue for me.
MarkEvinger
1 Message
1130
0
Posted October 24th, 2013 18:00
I renamed the file to *.000 and started the Disk Storage Manager again - it recreated the .bin file and opened OK.
-- Mark Evinger
JOHNADCO
2 Intern
•
847 Posts
1130
0
Posted October 25th, 2010 10:00