UNSOLVED

RangerZ

updated

5 months ago

R

RangerZ

1 Rookie

•

45 Posts

•

8 Points

0

267

June 15th, 2026 16:43

Inspiron 3670, Secure Erase locked drive

I have a Dell Inspiron 3670 which I have used on occasion to SECURE ERASE old drives.  

I have just SECURE ERASED a Seagate Freeplay 1500GB HDD pulled from an old Go-Flex case.  The process went real fast, but indicated the drive was erased (2-3 minutes?).  I was expecting some hours.  The system rebooted and gives the message:

Hard-drive #**Z110RRMB-BF97, the system internal HDD-0, is protected by a password authentication system.  You cannot access data on this hard drive without the correct password.  Please type in the hard drive password.

It 3670 has no passwords set. The HDD was never used on this computer and had recently been DISKPART Clean'ed on it's "home" PC.  

I have seen a few unresolved posts similarly related and frankly not expecting to get the password, but....  

I am VERY interested in knowing more about why this happened and how to prevent it.  As noted above, I have used and wish to continue to use this device for SECURE ERASEing drives.  I do not want them to end up in this state.

(edited)

  • RangerZ

    1 Rookie

    •

    45 Posts

    •

    8 Points

    0

    0

    Posted June 15th, 2026 17:54

    Related, It appears that with the drive connected via SATA I can not get to the BIOS with either the F2 or F12 keys.  I am unable to boot to an external USB drive (SeaTools).

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    0

    0

    Posted June 16th, 2026 00:56

    OP's concern is a hdd originally without password lock on another pc becomes password locked when connected to 3670.

    if the hdd password was indeed deployed by the same Dell Inspiron 3670 although "3670 has no passwords set", according to Dell, using the motherboard PW jumper reset method removes all BIOS passwords from your computer. This includes system passwords, setup passwords, and hard drive passwords.

    another thing to try is to replace cmos battery with a new battery and clear 3670 cmos settings via CMOS jumper.  this will clear a corrupted cmos/bios.

    (edited)

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    0

    Posted June 16th, 2026 01:36

    It 3670 has no passwords set. The HDD was never used on this computer and had recently been DISKPART Clean'ed on it's "home" PC.  

    Interesting that it survived a Diskpart Clean-ing.

    I tend not to mess with that kinda stuff, and this is just a guess ... but I'm reminded that there were (and still are) other full-disk encryption systems other than BitLocker (BDE).

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Chino de Oro

    11 Legend

    •

    8554 Posts

    •

    47161 Points

    0

    0

    Posted June 16th, 2026 02:17

    The Seagate FreePlay and FreeAgent GoFlex drives do not feature hardware-based self-encryption. Instead, they rely on pre-loaded software from the device dashboard for encryption.

    Dell Data Wipe could not have erased that drive within 2 - 3 minutes.  OP may want to try again on its home PC with cleaning and formatting the drive.

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    0

    0

    Posted June 16th, 2026 02:25

    if OP reconnect the hdd to the home pc (is it a Dell or not), would it show up as unlocked drive there?

  • RangerZ

    1 Rookie

    •

    45 Posts

    •

    8 Points

    0

    0

    Posted June 16th, 2026 03:05

    @redxps630 I have found the manual and will try the reset tomorrow.  Based on my research, it appears that the HDD password is stored on the drive. I have also moved the drive to another even older Dell 3020 and get the same message at boot.

    @Chino de Oro It was in a Seagate Go-Flex USB 3.0 case and removed for recovery. I also have learned, as you suggest, that the "Seagate Toolkit" is how the drive should get a password set, and this tool is not installed (per Belarc Advisor).

    The "Home" PC is about 45 minutes away at this point.  The PC it was attached to was not a Dell and while primarily used for data backup on 1 PC it was occasionally used on a second for system images.  This is NOT a bitlocker password or drive. 

    @Tesla1856 So some additional details.  I am quite familiar with DISKPART and use it regularly as opposed to Windows Disk Management.  I can do much more with setting up disk partitions.  The drive had some errors in the file system, but CRYSTAL DISK said it is fine, though suffers from high hours (55k), so the drive, in it's case was CLEANED and PARTITIONED in DISKPART on the original machine.  If there was a password I do not think it would have let me wipe it.  It hung during a large file transfer (restore of the backup) so I pulled it and took it to the dungeon for R&R. 

    I connected it to the 3670 and booted to BIOS.  It did not prompt for a password.  I used the BIOS to secure erase to reset the drive.  Yeah, I was aware it finished too fast.  When it was done and I exited, DNR it it rebooted or I restarted it, but then I got the password screen. 

    I have, since adding my first additional comment above learned that I can "ESC"ape the password dialog box and use F2 or F12 as needed.  I can now see that the BIOS reports that there is a password set for HDD-0, and that this moves between the 2 machines.  I can also see in SeaTools (bootable USB) that the drive has it's security on, but this tool set has no security or wipe options in it.  It's pretty much a diag tools set for RMAs.

    As I was able to both CLEAN the drive and start the SECURE ERASE of the drive with no prompts, I am of the opinion something in the secure erase process caused this.  There also are a number of others over the years indicating similar issues. 

    Thank you all for your thoughts.  RangerZ

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    1

    Posted June 16th, 2026 17:02

    @RangerZ​ ,

     

    The drive had some errors in the file system,

     

    It's just a spinning mechanical HDD

    suffers from high hours (55k),

    It hung during a large file transfer (restore of the backup) 

    I suppose an academic exercise for next time, but 4 bullets above point to removing it from ALL use and properly recycling it. Replace with a 2.5inch SATA-3/600 SSD.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.