Unsolved
This post is more than 5 years old
1 Rookie
•
96 Posts
0
27813
March 24th, 2012 03:00
X51 Alienware Heat Circulation
Just bought a X51 and was having some issues with heat. So i made an elevation stand with some Plywood to get the case of the ground and realized i got a heat reduction of 10c. I suppose my question is there any way we can convince dell to make a original stand even have some kind of base fan to help from underneath
No Events found!
kameix1
191 Posts
0
March 26th, 2012 05:00
Thats a really good idea. Dell could make something like the xbox 360 coolers.... Have it clip to the bottom and have 3 fans that push air up into the case.
solrac135
2 Intern
•
182 Posts
0
March 28th, 2012 06:00
Hello OoFeXoO
Can you post a picture here so we can see and understand better ?
Thanks
kameix1
191 Posts
0
March 28th, 2012 07:00
Something like this would be perfect.
solrac135
2 Intern
•
182 Posts
0
March 28th, 2012 10:00
kameix1 thanks for sharing !
I C not bad will check this out, with my suppliers in Shenzhen and let you know what they think
Fez
1 Rookie
•
96 Posts
0
March 29th, 2012 06:00
Fez
1 Rookie
•
96 Posts
0
March 29th, 2012 06:00
Tried uploading my picture didn't work. I'm not to good with forums. Its a stand with 2 fans forcing air up in to the unit from underneath. I tried it the other way round but I got better result this way. I got a Gigabyte GTX 560 Non Ti and I'm running temps at about 90c at full capacity with 1 fan (Burn in Test). I expect that with the other fan I'm going to install I'll get it down to about 80c 85c. will post once I've don't it
Fez
1 Rookie
•
96 Posts
0
March 29th, 2012 18:00
When i play Starwars Old Republic on max settings i get a max temp 85c with one fan after about 3 4 hours of play time