UNSOLVED

danomatic

updated

23 years ago

D

danomatic

7 Posts

0

17493

October 26th, 2003 18:00

Dell XPS D333: can't find pci parallel controller driver

I have reinstalled Windows 98 SE on a Dell XPS D333 and connot find the driver

"pci parallel controller". 

Without this, my PCI video card does not work.  Any suggestions?

Dan

  • NVRambo

    1864 Posts

    805

    0

    Posted October 26th, 2003 18:00

    Have you installed the Intel 440LX chipset drivers?
  • NVRambo

    1864 Posts

    805

    0

    Posted October 26th, 2003 20:00

    Excellent and informative post.
  • danomatic

    7 Posts

    805

    0

    Posted October 26th, 2003 20:00

    NVRambo, I have not installed the 440LX chipset drivers.  Is that a Dell download?

    Dan

  • speedstep

    11 Legend

    •

    46969 Posts

    805

    0

    Posted October 26th, 2003 20:00

    There is no PCI Parallel port in an XPSD series.

    WIN98SE has what it needs to see all the standard parts in an AL440LX motherboard which is what that is.

    You are saying that you have a non standard video card.
    Some of the XPS D series had an NVIDIA card or an ATI Rage Pro Agp Card.

    If you have a rage pro WIN98SE works without drivers.
    WIN98 Does not.

    http://mirror.ati.com/support/products/pc/ragepro/rageprodrivers.html

    The INTEL INF updater is needed for WIN98 sometimes
    to install the GART driver.

    http://www.intel.com/design/software/drivers/platform/inf.htm

    What is your service Tag number?

    I suspect you do not have WIN98SE or you do not have an XPS D series computer.

     

  • danomatic

    7 Posts

    805

    0

    Posted October 26th, 2003 20:00

    Yes, ok it's a strange setup. Sorry i didn't explain.

    A third party PCI video card was installed and there is a jumper cable on the outside of the computer from the AGP card to the PCI card. The monitor is plugged into the PCI Video card next to the jumper. The card is a Diamond Monster 3D II. Does this help? I will check out the Intel link.

    Dan

  • fredha

    1078 Posts

    805

    0

    Posted October 26th, 2003 22:00

    It sounds like you have a 3D accelerater added to your AGP card. You need to get the ID nos. off the card so you can get the correct drivers.
  • llbandit

    515 Posts

    805

    0

    Posted October 27th, 2003 09:00

    Have to agree NVRambo. SpeedStep you outdid yourself on that one...

    John
  • danomatic

    7 Posts

    805

    0

    Posted October 27th, 2003 11:00

    SpeedStep: 

    I tried the Intel updater and there was a message during the update something about creating PCI a bridge. The computer can now be set to 1024x768 which it could not before but the default card is the one that came with it, I think an L1000.

    When I launch settings by right clicking on the desktop, I see a tab for the Monster Card but any changes I make there have no effect. I went into setup during bootup and changed the video to “PCI” from AGP, but no effect.

    I am moving the computer today to a location where a lot of the original disks for the computer are so I will check back later with my results. 

    (The install is Win 98SE and confirmed it is an XPS D333 PII.)

    Thanks for all the help!

  • danomatic

    7 Posts

    805

    0

    Posted October 29th, 2003 16:00

    Thanks for all the help!  Everything is fixed now.

    Dan