Unsolved
This post is more than 5 years old
3 Posts
0
710652
September 16th, 2010 14:00
disable internal speakers
I am configuring a lab of 31 computers with Optiplex 380. I need the users to be able to use headphones, but when headphones are not attached, I do now want to hear the internal speakers.How do I disable internal speakers yet allow headphone? i realize when the headphones are attached it overrides the internal, but headphones will not always be in use and a room full of computers with sound happening at odd times will be distracting to the others.
No Events found!


gwforeman
69 Posts
0
September 16th, 2010 19:00
Look in the case, there should be a small speaker. Just unplug it from the motherboard.
Jeff Hoffman
2 Intern
•
881 Posts
0
September 16th, 2010 21:00
Ahhh, well let's see....... If I were in this situation I believe I would unplug the speaker. If for whatever reason it was hardwired I would cut the wire(s).
Jeff :emotion-22:
NUSlady
3 Posts
0
September 17th, 2010 08:00
Thank you for your reply. I was hoping for a solution that I could implement with having to open the case of 29 computers. If that is the only way, oh well.
Mary G
6 Operator
•
20.1K Posts
0
September 17th, 2010 09:00
You should research this further. Does the Optiplex have a separate or integrated sound card? The internal speakers are only for system beeps and alerts, not regular sounds--like Internet, sound schemes, etc. You have to attach speakers to the green sound port for sounds. Seems to me you don't have to cut or disable any wires.
fireberd
11 Legend
•
33.4K Posts
•
112.8K Points
0
September 17th, 2010 11:00
Some of the commercial line desktops do have optional internal speakers, unlike the consumer line that does not.
It looks like whoever ordered them, ordered them with the optional internal speakers.
I agree with the others, open the case and disconnect the speaker. It may be a hassle but they do get "permanently" disabled.
Mary G
6 Operator
•
20.1K Posts
0
September 18th, 2010 11:00
Thanks, I was not aware that business computers could be ordered with internal speakers. Too bad there is not a way to disable them without cutting wires.
Rodeca
31 Posts
0
November 4th, 2010 11:00
[I do know it is late but...]
You'll not find any internal speaker (probably), but a "beep"; and you'll cannot cut the wires: it is soldered. Look for a black cylinder near the button battery: that is the "speaker" which beeps.
I cannot test it (I was loofing just for the opposite: my "beepers" never beep) but, in Windows 7, clicking over the speaker icon (at system tray) you can get the "mixer". There you can setup "speakers" and "system sounds" at different levels.
Sorry
RØ
Rodeca
31 Posts
0
November 4th, 2010 12:00
I apologize for my simplified sentence: of course you are right. What I meant is:
"unless you explicitly have selected the optional internal speaker (380 has that option), you'll not find..."
And, as most of us try to cut budget...
Regards
RØ
P.S. I'm sorry: writing in English is somewhat tiring when you think in another language :emotion-42:
fireberd
11 Legend
•
33.4K Posts
•
112.8K Points
0
November 4th, 2010 12:00
SOME models of the commerical line systems DO have an option for internal speaker. The Home/Consumer line PC's do not have this option.
Print USMC
1 Message
0
February 25th, 2014 06:00
If you're running Microsoft Windows you can disable the Internal speaker or PC speaker by following the below steps.
Motherboard jumper
If following the above steps does not disable the Internal speaker you can also almost always disable the Internal speaker through jumpers on the motherboard. Many motherboard manufacturers have jumpers that when jumped or not jumped will enable the onboard speaker.
Unfortunately all motherboards are different, therefore you will need to refer to the motherboard documentation in order to determine if your motherboard has such a jumper and what to set it to.
Motherboard cable
Some motherboards do not have an onboard speaker and instead use a computer case speaker that can be removed to disable the speaker. Unfortunately again you will need to refer to the motherboard or computers documentation to determine if your computer is setup this way.