Unsolved

This post is more than 5 years old

Closed

1 Rookie

 • 

3 Posts

170937

October 11th, 2006 19:00

CPU Upgrade D600

I have a 600m inspiron with a D600 latitude motherboard running a 1.7 Pentium M , SL6N5, RH80535, 400mhz FSB, 1mb L2 Cache, the cpu alias is banias, 479 Ball uFCBGA / 478 Pin uFCPGA.

Does anyone know if I can upgrade the CPU, and if so, how high can I go?

Thanks in advance.

2 Intern

 • 

2.4K Posts

October 12th, 2006 00:00

you can upgrade to Pentium M cpus with 2MB cache and 400Mhz FSB
i beleive the max was 2.1GHz

1 Rookie

 • 

3 Posts

October 24th, 2006 21:00

Thanks.



I found (with a lot of reading on these message boards) you can upgrade to:

sSpec# CPU Speed



SL7V3 2.10 GHz
SL7EM 2.00 GHz
SL7EN 1.80 GHz
SL6N5 1.70 GHz
SL7EP 1.70 GHz
SL6FA 1.60 GHz
SL7EG 1.60 GHz
SL6F9 1.50 GHz
SL7GL 1.50 GHz
SL6F8 1.40 GHz
SL6N4 1.30 GHz


I found this information at:

http://processorfinder.intel.com/Default.aspx

It is important that everybody know that the D600 and the 600M are Intel Pentium M
type processors, NOT the Intel Pentium 4 - M, or the
Pentium 4.

Package type MUST be 478, and the FSB (Front Side Bus) MUST be 400MHZ or it will
not work.


I am now a
D600 2.0
2GB Ram

Message Edited by cpu_tinker on 10-24-2006 05:34 PM

Message Edited by cpu_tinker on 10-24-2006 05:35 PM

1 Rookie

 • 

91 Posts

October 29th, 2006 21:00

Do you did not get a 479pin processor? I was looking at CPU-Z and it shows up as a 479pin processor in the info. If it's 478, there are a lot more of those on eBay for me to get!

If you can confirm, that would be FANTASTIC! :)

1 Rookie

 • 

91 Posts

October 29th, 2006 21:00

I just confirmed for myself. I took the processor out of my D600, and it's a SL6F8 and that is a 400Mhz, 478pin.

HOPEFULLY I'll be able to go to a 2.1Ghz processor.

1 Rookie

 • 

3 Posts

October 29th, 2006 22:00

Yep, they are 478 for the D600 and the 600m. Not sure if 478/479 are the same. They might be. But I know the 478 is the one for the 600's 4 SURE.

1 Message

November 18th, 2008 16:00

will a SL6V9 intel mobile m proccessor work with the dell d600????

1.6K Posts

November 18th, 2008 16:00

No. That's a mobile p4-m.  No P4s work in the d600 - ONLY Pentium M CPUs or Celeron M will work.

 

1 Rookie

 • 

17 Posts

July 23rd, 2012 18:00

I have a D600... It has a 1GHz CPU, very slow... I don't know what the SL6N5, RH80535 numbers for it are... I don't know how to find them??? 


I would appreciate it if U could help me... I would LOVE to have a 2.1GHz CPU like the other gentleman was speaking about... I know that I can swap them out, I've done it before on other laptops... I just don't want to buy a CPU that won't work in this laptop...

Thanks again for any constructive help offered...

Shalom...

11 Legend

 • 

87.5K Posts

 • 

321.3K Points

July 23rd, 2012 19:00

That's a 1.7 GHz CPU - if it's really running that slow, something is wrong - most likely with the system board.

1 Rookie

 • 

17 Posts

July 23rd, 2012 20:00

UR correct... it does say 1.6GHz  with a 100MHz bus speed and 400MHz FSB (Code Name: Banias)...  Socket 479 Pentium M... i855GM chipset

That's what CPU-Z is telling me about it... So, it sounds like I can put a 2.1GHz CPU into it...

Does that sound Okay???

BTW... Thanks...

No Events found!

Top