6224 web UI - default IIS page?

HTTP is enabled as i checked

console#show ip http

HTTP Server is Enabled.   Port :  80

how do i configure that?

Hi Daniel

I have enabled https but https://10.1.1.1 still not loading. If success i should see login page right?

Is this the one?

console#show running-config

!Current Configuration:

!System Description "PowerConnect 6224, 3.3.10.3, VxWorks 6.5"

!System Software Version 3.3.10.3

!Cut-through mode is configured as disabled

!

configure

stack

member 1 1

exit

ip address 10.1.1.1 255.255.255.0

username "admin" password ***** level 15 encrypted

exit

The computer accessing the switch has IP 10.1.1.50. subnet 255.255.255.0. RJ45 is plugged into the same switch 10.1.1.1.

Ops. I rebooted the switch previously i think the config is gone. I have enabled https now.

console#show running-config

!Current Configuration:

!System Description "PowerConnect 6224, 3.3.10.3, VxWorks 6.5"

!System Software Version 3.3.10.3

!Cut-through mode is configured as disabled

!

configure

stack

member 1 1

exit

ip address 10.1.1.1 255.255.255.0

ip https server

username "admin" password ****** level 15 encrypted

exit

I'm still getting the connection was reset when browse to https://10.1.1.1

I think i found where the problem is. I have one VMware adapter with IP 10.1.1.1. Disabled it and i can browse 6224 switch web GUI.

Thanks!