class-map can't match ACL

Question

Hello,     I have DEll S4148F-ON, OS Version: 10.5.2.3   I'm trying to create a class-map and match it ip acces-list.    The idea is to use this class map inside a policy-map and allocate 50M of traffic to BGP protocol    BGP runs on tcp port 179.    I have created the follwoing ACL   When I tried to create a class map and attached the ACL I got an error message of 'Error: Illegal parameter'   I'm attacing the configuration:     ACL:   (config)# ip access-list TCP_179  (config-ipv4-acl)#permit tcp any any eq 179    Class-map:   (config)# class-map match-all TCP_179  (config-cmap-qos)# match ip access-group TCP_179   % Error: Illegal parameter.     The access list exsits.   Does anyone has a clue why I'm getting this error message ?    Thanks,

DELL-Charles R · Answer

Hello E-B-M,   I think this may help: ACL-based classification page 1628 Policing traffic page 1637 https://dell.to/3oq9pWt

E-B-M · Answer

Hello, Thanks for the answer. The only thing that is missing in these examples is how to match specific acl to a class map

DELL-Charles R · Answer

Hello E-B-M,

Check on class-map page 1693

You may want to call into support for an engineer to work in a remote session with you on this. If done improperly it could block traffic.

We can see if anyone in the community has tried this and can share their results.

Networking General

Was this post helpful?