Unsolved
1 Message
0
1338
September 15th, 2021 14:00
Radius on Dell EMC SmartFabric OS10
hello,
I just configured Radius access in Dell EMC SmartFabric OS10, however the once a radius user access the switch they only have privilege 1 or netoperator. I cannot find the way to configure so the radius users are sysadmin or take the configuration setup already in the radius server which makes these user to have full control.
thank you,
No Events found!
Kendre1
2 Posts
0
February 2nd, 2022 04:00
Hi,
Same here. I tried to configure aaa authorization but there is only tacacs+ group available. A have enable password set but no enable command available.
Thank you!
Kendre1
2 Posts
0
February 2nd, 2022 05:00
Workaround.
You can override the default user role like this: # userrole default inherit sysadmin
Source: Unknown user role
DellForumAcc
1 Message
0
February 21st, 2023 07:00
Hi Kendre1 did this command actually work for you? When I log back using radius after using this command I am still at priv 1. ?
toine0
1 Message
0
June 15th, 2023 02:00
Hi,
You can change the default user role if it is not specified, but you can also let the RADIUS server specify it.
You need to add the vendor specific attribute code 674, attribute n°2 and set it with a string value containing the user role you want to assign this group.
The KB is here: https://www.dell.com/support/kbdoc/fr-fr/000120149/how-to-configure-server-2016-nps-radius-server-for-dell-emc-networking-os10?lang=en