9020 SFF (Small Form Factor) - NVIDIA QUADRO P4000

Question

Hello,

I have **bleep** 9020 SFF (Small Form Factor) and am wondering if I can install it an NVIDIA Quadro P4000 given the following parameters:

1. Length must be <17cm (6.5") since the SFF can only take cards of length up to 17cm and the NVIDIA Quadro P4000 has the following dimensions: 4.40" Height x 9.50" Length

2. Single slot - the PSU is very close from the PCI Express x16 slot

3. Powered by PCI Express only, the NVIDIA Quadro P4000 has a TDP of 105 W

Here is the technical data sheet for the NVIDIA Quadro P4000:

http://www.pny.com/nvidia-quadro-p4000

Please help me confirming if it would be possible or not installing the NVIDIA Quadro P4000 on an **bleep** 9020 SFF.

speedstep · Answer

Doubt it works at all. 25W cards are max and they cant have tall heatsinks. P4000 is NOT a short Low Profile card so it does not physically fit in the case.

http://goo.gl/Sk7nzL

Somehow it thinks O p t i p l e x is a swear word?

:Surprise:

Smeve · Answer

There's some bad info out there. The 9020sff has a 75w limit NOT 25w. Unlikely the quadro will power. Try a 1030 up to 1050ti as a maximum gpu card. Double width, low profile 2 fans,installed in 4x slot. Gives good performance at medium setting on Fo4. Its pushing the limits of the psu, but running stable.

Optiplex Desktops

9020 SFF (Small Form Factor) - NVIDIA QUADRO P4000

Was this post helpful?