UNSOLVED

JR3670

updated

9 months ago

J

JR3670

1 Rookie

•

5 Posts

•

2 Points

0

195

February 18th, 2026 19:53

Can't get 1920 x 1200 resolution on Dell 7020 Optiplex MFF

I have a Dell 7020 MFF with Intel GPU UHD Graphics 770.  The computer has 2 identical Dell U2412M monitors attached.  I can get both monitors running 1920x1200, but then the resolution on one of the monitors changes to 1920x1080.  So, currently I have identical monitors running at different resolutions.  I have fixed this by disconnecting the cables to the monitors and letting the system rediscover them.  I have also looked at device manager and have seen one of the 2 monitors listed as a Generic Display.  I changed that by updating the driver to be the Dell U2412M driver. Right now, if I look at the Intel Graphics Software information on the Display tab, I see 2 monitors, one with no description and one reading Dell U2412M.

I would like a permanent fix.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    0

    Posted February 18th, 2026 22:44

    Well, that is an older Optiplex, and the Intel on-board graphics cards were notoriously "weak" back then. I'm guessing you are running (and locked at) Windows-10 on that computer?

    Those are old now (but still NICE) Dell pro-class UltraSharp 16:10 monitors. I loved my u2410 until it finally decided to stop turning-on last year.

    Yes, you should ideally be able to run them both at their max (recommended) resolution.

     

    What ports are you using on both ends?

     

    Yeah, try to get the proper monitor .inf working.

     

    Is Windows-10 allowing you to run the new "Intel Graphics Software" on that setup, or are you limited to the (now depreciated) Intel Command Center? On my Intel-i9 Windows-11 system, they said I had to remove ICC if I wanted IGS to work properly. I don't have anything connected to the Intel (I use a Nvidia RTX-4080) but I don't like my system complaining about stuff like that.

    (edited)

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • JR3670

    1 Rookie

    •

    5 Posts

    •

    2 Points

    0

    0

    Posted February 18th, 2026 22:53

    The computer is only a year old, but may be an older model.  The monitors are at least 10 years old.  The computer is running Win 11.  The monitors are connected HDMI and Display Port to a DVI adapter.  Everything worked perfectly until recently.  It matters because I use a utility called Wonderful Icon which moves and sizes windows on the screen. 

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    0

    Posted February 19th, 2026 00:43

    @JR3670​ ,

    1. The computer is only a year old, but may be an older model.

    2. The computer is running Win 11.

    3. The monitors are at least 10 years old. 

     

    4. The monitors are connected HDMI and Display Port to a DVI adapter.  

    5. Everything worked perfectly until recently.  It matters because I use a utility called Wonderful Icon which moves and sizes windows on the screen. 

    1. The "20" threw me off. Maybe it's really a "Plus" ?

     

    AI Overview
    The Dell OptiPlex 7020 Plus (2024 model) was released in 2024 featuring 14th Gen Intel processors and DDR5 memory. However, an older, separate version of the Dell OptiPlex 7020 was released in 2014. 

     

    2. Cool. Then definitely do the Intel driver app thingy above.

     

    3. Pretty sure the "12" means 2012-model ... yes, 14 years old. But they were considered high-end when new.

     

    4. The HDMI to DVI is fine because that is what HDMI is ... it's just DVI with sound and HDCP.

     

    The Display-Port to DVI success depends on the adapter quality.

     

    5. Then it sounds like a software problem. Try deleting one of both monitors from DM and let them re-detect. Also, sounds like you are using strange display-control software, so why not try without it ... just use Windows-11.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • JR3670

    1 Rookie

    •

    5 Posts

    •

    2 Points

    0

    0

    Posted February 19th, 2026 00:51

    Strange display control software?  What does that mean?  It’s a Dell that has Intel GPU on the motherboard.  I get constant Intel updates for graphics, WiFi, Bluetooth, etc.  once a month probably and it seems things get worse?

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    0

    Posted February 19th, 2026 01:12

    @JR3670​ ,

     

    Strange display control software?  What does that mean? 

     

    You previously posted:

    "... Wonderful Icon which moves and sizes windows on the screen."

    I simply meant ... try uninstalling it and see if your problems with "screens" goes away. It's a basic troubleshooting step. 

     

    I thought we we getting somewhere, but I guess not. I'll let someone else try to help you.

    (edited)

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • JR3670

    1 Rookie

    •

    5 Posts

    •

    2 Points

    0

    0

    Posted February 19th, 2026 21:38

    The monitor in question is connected by a display port cable.  I disconnected the cable from the monitor and then reconnected.  After doing that, the monitor came up in 1920x1200.